The EL2032 digital output terminal connects the binary 24 V DC
control signals from the automation device on to the actuators at
the process level with electrical isolation. The EtherCAT Terminal
has two channels that indicate their signal state via light emitting
diodes. The integrated diagnostics can be evaluated in the controller
and is indicated by the LEDs. The EL2032 allows direct connection
of two 3-wire actuators.

Special features:
• Connection of different load types possible (ohmic, inductive,
lamp load)
• Max. output current 2 A per channel
• Short-circuit-proof outputs and reverse polarity protection
• Integrated diagnostics capability
• Short-circuit detection per channel
• Line break detection per channel
wechat/whatsapp:
+86-181-44100-983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved