Beckhoff EL2202 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, push-pull, tristate

The EL2202/EL2202-0100 digital output terminal connects the

binary control signals from the automation device on to the

actuators at the process level with electrical isolation.

This terminal benefits from very small output delay and is therefore

suitable for signals requiring particularly fast output.

The EtherCAT Terminal has a push-pull output that can be actively

switched to 24 V, 0 V or high-impedance.

The EL2202-0100 contains two channels. LEDs indicate the signal

state of each channel.

Unlike the EL2202. the EL2202-0100 already has distributed clocks

(DC) support enabled, i.e. the output data can be monitored

synchronously with other data from terminals with distributed clock

support. The system-wide DC accuracy is << 1 μs. The activation or

deactivation of the distributed clocks support can also be done by

the user on the EL2202 (see documentation), on the EL2202-0100

it is included ex works.

Special features:

• push-pull output with tristate

• suitable for particularly fast signal output

• high-impedance output switching option

• max. output current 0.5 A per channel

• synchronized operation via distributed clocks XFC technology