Beckhoff EL2202-0100 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, push-pull, tristate, distributed clocks

The EL2202/EL2202-0100 digital output terminal connects the binary

control signals from the automation device on to the actuators at the

process level with electrical isolation. This terminal benefits from very

small output delay and is therefore suitable for signals requiring

particularly fast output. The EtherCAT Terminal has a push-pull output

that can be actively switched to 24 V, 0 V or high-impedance.

The EL2202-0100 contains two channels. LEDs indicate the signal state

 of each channel.

Unlike the EL2202. the EL2202-0100 already has distributed clocks (DC)

support enabled, i.e. the output data can be monitored synchronously

with other data from terminals with distributed clock support.

The system-wide DC accuracy is << 1 μs. The activation or deactivation

of the distributed clocks support can also be done by the user on the

EL2202 (see documentation), on the EL2202-0100 it is included ex works.

Special features:

• push-pull output with tristate

• suitable for particularly fast signal output

• high-impedance output switching option

• max. output current 0.5 A per channel

• synchronized operation via distributed clocks XFC technology