The ED2504 EtherCAT Terminal offers up to four digital outputs,
which are output as pulse-width modulated signals. The output
signal can be modulated in both pulse width and frequency in
the range of 1 Hz to 64 kHz. The output level is determined by
the external voltage to be fed in and can be freely selected in
the range from 5 V DC to 24 V DC.

The outputs are short circuit and overcurrent protected.
Each channel also has a digital input with configurable filter times.
The switching characteristic can be selected as either positive
or ground switching (PNP/NPN) for each channel.
The input can be used as a digital input or to enable the PWM
output. If the PWM signal is used to control the fan, for example,
the additional input can be used for the measurement of rotary
speed.
The ED series EtherCAT Terminals have push-in connection
technology which makes wiring easy and tool-free.
wechat/whatsapp:
+86-181-44100-983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved