Beckhoff EL1918 | EtherCAT Terminal, 8-channel digital input, 24 V DC, TwinSAFE, TwinSAFE Logic

The EL1918 TwinSAFE component is a digital input terminal for sensors

with potential-free contacts for 24 V DC. The EtherCAT terminal has eight

fail-safe inputs, which are transmitted via FSoE to a TwinSAFE Logic-capable

component.

The EL1918 has safety parameters to specifically adapt the functionality to

the respective safety requirements. Thus, for example,test pulses can be

configured with fine granularity for all eight channels in order to be able

to connect as many types of sensors as possible.

The safety parameters are not stored directly on the component, but are

transmitted to the input terminal via a TwinSAFE Logic capable component

when the safety application is started. This simplifies service procedures,

because the component can simply be replaced.

The safety-relevant parameters are transferred to the new component when

the safety application is restarted.

A further highlight of the EL1918 is the integration of the functionality of the

EL6910 TwinSAFE Logic. The EL1918 can also be used as a safety controller

at any time. In the default case, the EL1918 is a simple input terminal,

whose input signals are transmitted via FSoE to a TwinSAFE Logic-capable

component. It can be used directly as a safety controller in order to process

input signals directly in the terminal so as to forward only accumulated

information to a TwinSAFE Logic, or a complete safety application can be

implemented on the EL1918. The range of functions corresponds to that of

the EL6910. The only difference is the limitation of the number of possible

safe connections to 128. Apart from that, all the advantages of the new

generation of safety controllers can be used (see EL6910 customizing,

incremental download, analog value processing, etc.).

Special features EL1918:

• 8 safe inputs

• integrated TwinSAFE Logic (functionality similar to the EL6910)

• up to 128 safe connections

• fine granular configuration of the test pulses of the individual channels

For applications without integrated TwinSAFE Logic, the EL1918-2200 can

be used.

Special features EL1918-2200:

• 8 safe inputs

• fine granular configuration of the test pulses of the individual channels

• TwinSAFE Logic not integrated