Power Engineering 
K-JIANG
Product
Article
NameDescriptionContent
English 简体中文
  • DEIF MVR-F215 Product description
  • DEIF MVR-F210 Feeder Protection
  • DEIF MVR-F205 Directional Feeder Protection
  • DEIF PPM 300 Protection & power management
  • DEIF RMC-142D Current relay
  • TMEIC PV Inverters SOLAR WARE 3200
  • TMEIC Power Plant Controller
  • GE T60 Transformer Management Relay
  • GE Multilin™ G60 Comprehensive Protection for Generators
  • DEIF MVR-G257 Features Protection Functions
  • DEIF MVR-G215 Features Protection Functions
  • DEIF MVR-G257 Generator Differential Protection
  • DEIF MVR-G215 Generator Protection
  • DEIF MVR-F255 Features Protection Functions
  • DEIF MVR-F255 Directional Feeder Protection
  • DEIF MVR-F201 Basic Feeder Protection
  • DEIF USW-3 DEIF utility software
  • DEIF CIO 116 CAN bus-based I/O module
  • DEIF CIO 208 CAN bus-based I/O module
  • DEIF CIO 308 CAN bus-based I/O module
  • DEIF AGC 150 Mains Advanced Genset Controller
  • DEIF SGC 421 Mk II Single genset controller
  • DEIF SGC 421 Single genset controller
  • DEIF SGC 420 Mk II Lite Single genset controller
  • DEIF SGC 420 Mk II Single genset controller
  • DEIF SGC 420 Single genset controller
  • DEIF SGC 410 Mk II Single genset controller
  • DEIF SGC 410 Single genset controller
  • DEIF SGC 121 Single genset controller
  • DEIF SGC 120 Mk II Single genset controller
  • DEIF AGC 150 Generator Marine Standalone generator controller for marine applications
  • DEIF AGC 150 Engine Drive
  • HIMA HIMax® HART Communication Module X-HART 32 01
  • HIMA HIMax®Analog Output Module X-AO 16 01
  • HIMA HIMax® Digital Output Module X-DO 24 01
  • HIMA HIMax®Digital Output Module X-DO 32 01
  • HIMA HIMax® Analog Input Module X-AI 16 51
  • HIMA HIMatrix Safety-Related Controller DI 32 01
  • HIMA HIMax® Analog input module X-AI 32 01
  • HIMA HIMatrix Safety-Related Controller F3 AIO 8/4 01
  • HIMA HIMax®Relay Module X-D0 12 51
  • HIMA HIMax®Relay Output Module X-DO 12 01
  • HIMA HIMax®Digital Output Module X-DO 32 51
  • HIMA HIMax®Counter Module X-C1 24 51
  • HIMA HIMax®Digital Input Module X-DI 16 01
  • HIMA X-DI 32 52 Digital Input Module for ProximitySwitches and Wired Contact Makers
  • HIMA HIMax® Analog input module X-AI 32 01
  • Beckhoff EL1918 | EtherCAT Terminal, 8-channel digital input, 24 V DC, TwinSAFE, TwinSAFE Logic
  • Beckhoff EL1904 | EtherCAT Terminal, 4-channel digital input, 24 V DC, TwinSAFE
  • Beckhoff EL1899 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 10 µs, ground switching
  • Beckhoff ED1897 | EtherCAT Terminal, 32-channel digital input, 24 V DC, adjustable, ground switching, push-in
  • Beckhoff EL1889 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms, ground switching
  • Beckhoff EL1852 | EtherCAT Terminal, 8-channel digital input
  • Beckhoff ED1819 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 10 µs, push-in
  • HIMA PT 201 | SILworX® Engineer
  • HIMA X-SB 01 HIMax® System Bus Module
  • KEBA Kemro X- Industrial Automation Platform open, modular, easy-to-use
  • Kollmorgen GOLDLINE servomotors
  • Kollmorgen GOLDLINE Motors with SERVOSTAR
  • Kollmorgen PMX Stepper Motors
  • Kollmorgen EKM Series Brushless AC Servo Motors
  • Kollmorgen Goldline® S Series Submersible Servo Motors
  • Kollmorgen Goldline EB and EBH Series
  • Kollmorgen Goldline B/M & BH/MH Series
  • GE Multilin™ 889 Generator Protection System
  • GE Multilin 859 Comprehensive and Compact Motor Protection
  • GE Multilin 869 Overview
  • GE Multilin 869 Comprehensive Motor Protection and Management
  • GE GridBeats™ APS Key Benefits and Applications
  • GE MULTILIN 850 Feeder and Bay Controller Solutions for Industrial and Utility Applications
  • GE The GridBeats™ APS is a family of hardware and software products
  • GE Multilin 8 Series Platform Overview
  • GE Multilin™ 845 Transformer Protection System
  • GE GridBeats™ APS Automation and Protection System
  • GE PQMII Power Quality Meter™
  • BAUMULLER b maXX softdrivePLC - Intelligence in the drive
  • BAUMULLER b maXX 6300 – Single / double-axis modules for maximum scalability
  • BAUMULLER b maXX 3300 - Servo-controller up to 5 kW
  • EATON Effortless control easyE4 nano PLC
  • Woodward LS-5 Series V2 Multi-Breaker Control for complex power management applications
  • EATON XN300 Slice card modular I/O system
  • Beckhoff EL1814 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 10 µs, 3-wire connection
  • Beckhoff ED1829 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms
  • Honeywell X-NRI/EN Network Resource Interface
  • Honeywell x-smart System Management Software
  • Honeywell x-map4p Integrated Audio Player
  • Honeywell X-DA1500 High-efficiency Power Amplifier
  • Honeywell X-DA4125 HIGH EFFICIENCY POWER AMPLIFIER
  • Honeywell X-DA2250 High Efficiency Power Amplifier
  • Honeywell X-DA2250EN-B High Efficiency Power Amplifier
  • Honeywell X-DA1500EN High Efficiency Power Amplifier
  • Honeywell X-DA4125EN High Efficiency Power Amplifier with 24 VDC Backup Power Supply
  • Honeywell X-ND100 Digital Noise Detector
  • Honeywell X-K8 Extension Keypad
  • Honeywell X-K4 Extension Keypad
  • Honeywell X-NPMS Configurable Network Paging Station
  • Honeywell X-DCS3000 Digital Integrated System Manager
  • Honeywell X-DCS2000 Digital Integrated System Manager
  • Automotion LC-4 DC Brushless Motor Control
  • Honeywell X-DCS2000/EN Digital Integrated System Manager 50/60Hz 100-240V #4
  • Kongsberg M3 Sonar® HF with sound velocity sensor
  • Kongsberg M3 Sonar® HF
  • Kongsberg M3 SONAR® - 4000 M WITH SYNCHRONIZATION AND 1PPS
  • Beckhoff ED1839 | EtherCAT Terminal, 16-channel digital input, 24 V DC, adjustable, push-in
  • Beckhoff ED1809 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms, push-in
Home ⊙ Product ⊙ ABB 2VAA008441R11 cAO01A Compact SD AO Module
Current Location:

E-mail

Password
Register Forgot password?
ABB 2VAA008441R11 cAO01A Compact SD AO Module
❤ Add to collection

ABB 2VAA008441R11 cAO01A Compact SD AO Module

+86-18144100983
kongjiangauto@163.com
wind, petroleum, chemical, natural gas, Marine, mining, aviation, electronics, steel, nuclear power, electric power, coking, air separation and so on
PLC, DCS, servo, analog, Ethernet, digital, redundant module, tension system, excitation, generator management, human-machine interface, detection card, sensor, AC drive, etc
U.S.＄10055.00
U.S.＄4548.00
Weight：0.000KG
Quantity：
(Inventory: 99999)
Buy now
Add to cart
Product parameters
  • Tell:+86-18144100983
  • email:kongjiangauto@163.com
  • Application:wind/ petroleum/ chemical/ natural gas/ Marine/ mining/ aviation/ electronics/ steel/ nuclear power/ electric power/ coking/ air separation and so on
  • Series:PLC/ DCS/ servo/ analog/ Ethernet/ digital/ redundant module/ tension system/ excitation/ generator management/ human-machine interface/ detection card/ sensor/ AC drive/ etc
Feature

Features and benefits

Termination for up to eight (8) analog I/O process signals within a horizontal row.

All SD I/O modules & bases of all types (Singular or Redundant) AND (Compact or Full-size), are

100% fully compatible with each other. Thus, Singular & Redundant, Compact or Full-size I/O

modules can be mounted within a single, common HN800 I/O bus.

Optional mechanical keying can be implemented to prevent insertion of the wrong I/O module

type.

Latching device on the base locks the base into position on DIN-Rail.

Industry standard 35-mm DIN rail, Horizontal row mounting.

Time Synchronization

Enable Time Synchronization

Determines whether or not the Server receives and sends the time synchronization 

on the network. When enabled, the Server is in time synchronization with the 

control network.

Accuracy

Time synchronization accuracy of the Server is valid when the Server is in time 

synchronization mode. The options are:

• Low accuracy (lowest accuracy); priority 0.

• Low accuracy battery backed; priority 3.

• High accuracy battery backed; priority 6.

• IIOIS20 node; priority 9.

• IIOIS20 SCSI; priority 10.

• PIMS SCSI; priority 11.

• Satellite clock system (highest accuracy); priority 12.

These accuracy settings are only used when negotiating for time mastership with 

other nodes in the underlying Harmony control network.

Master Update Period

Master update period is the frequency that Harmony Server synchronizes time with 

the underlying Harmony control network. This property is used only when Time 

Synchronization is enabled. The permissible values are 120 to 3540 seconds.

Message Wait Period

Message wait period is the Period that Harmony Server waits before attempting to 

assume time mastership on the control network. This property is used only when 

Time Synchronization is enabled. The permissible values are between 180 and 3660 

seconds. Additionally, the configured value must greater than the Master Update 

Period.

Sending Global Alarm Acknowledgement Messages to the Loop

Enable Tag Acknowledgment Broadcast 

To broadcast an alarm acknowledgement for a specific Harmony tag: 

– Select the Tag Acknowledgment Broadcast Enable check box on the  Harmony Tab of the tag. Selecting the 

checkbox enables the connectivity server to broadcast the alarm  acknowledgement for this tag on the communication highway.  

Enable Acknowledgment Transmission 

Configure the module status tag for each node to which the connectivity server  transmits the alarm acknowledgment messages. 

For each module status tag, on the  Module tab, select the Enable Alarm Acknowledgment 

Transmission check box to  have the connectivity server transmit any recently acknowledged alarms.

Broadcasts  will only be sent to a node when the corresponding module status tag is configured  and has alarm acknowledgment transmission enabled.  

Receiving Global Alarm Acknowledgement from the Loop 

Configure the Harmony Server tag to enable receiving global alarm  acknowledgment messages from other nodes on the loop. 

On the Harmony tab, select the Global Alarm Acknowledgement check box to  

enable the connectivity server to process the Global Alarm Acknowledgement  messages received through the INFI-NET loop. 

The connectivity server applies the alarm acknowledgement to the harmony tag that  has the same Harmony address as the broadcast tag.

You may need the following additional products：

ABBHIEE305084R0002 UNS 0861 A-PV2 power supply
ABBHIEE405179R0001 UNS 0862 A-PV1 Analog input/output
ABBHIEE405227R0001 UNS 0864 B-PV1 diode monitoring
ABBHIEE405167R0001 UNS 0865 A-PV1 Power System Stabilizer
ABB3BHE01 3940R0001 UNS 0868 B-PV1 power supply
ABB3BHE01 3940R0002 UNS 0868 B-PV2 power supply
ABB3BHB001337R0002 UNS 0869 A-PV2 Power System Stabilizer
ABB3BHB002651R0001 UNS 0874 A-PV1 Control Panel
ABB3BHE004059R0104 SDCS-CON 2-21 Motherboard
ABB3ADT315100R1012 SDCS-POW 4 internal power supply
ABB3BHE006422R0001 UNS2861 C-P, V1 HGC door control unit
ABBHIEE30511 1R0001 UNS 2860 B-P Chopper stage
ABB3BHE009319R0001 UNS 2881 B-P V1 measuring cell board
ABB3BHE003855R0001 UNS 2882 A-P V1 Extended Door Controller
ABB3BHB005922R0002 UNS 0880 A-PV2 converter interface
ABB3BHB006338R0001 UNS 0881 A-PV1 Door Driver Interface
ABB3BHB006338R0002 UNS 0881 A-P V2 Door Driver Interface
ABB3BHB006309R0001 UNS 0882 A-P V1 power signal interface
ABB3BHB006208R0001 UNS 0883 A-PV1 fast input and output port
ABB3BHE004385R0001 UNS 0884 A-P V1 current sensor
ABB3BHB006943R0001 UNS 0885 A-Z V1 Converter Display
ABB3BHB006943R0002 UNS 0885 A-Z,V2 Converter Display


  • TMEIC PV Inverters SOLAR WARE 3200
  • TMEIC Power Plant Controller
  • GE T60 Transformer Management Relay
  • GE Multilin™ G60 Comprehensive Protection for Generators
  • DEIF MVR-G257 Features Protection Functions
  • DEIF MVR-G257 Generator Differential Protection
  • DEIF MVR-G215 Generator Protection
  • DEIF MVR-G215 Features Protection Functions
  • DEIF MVR-F255 Features Protection Functions
  • DEIF MVR-F255 Directional Feeder Protection
  • DEIF MVR-F201 Basic Feeder Protection
  • DEIF USW-3 DEIF utility software
  • DEIF CIO 116 CAN bus-based I/O module
  • DEIF CIO 208 CAN bus-based I/O module
  • DEIF CIO 308 CAN bus-based I/O module
  • DEIF AGC 150 Mains Advanced Genset Controller
  • DEIF SGC 421 Mk II Single genset controller
  • DEIF SGC 421 Single genset controller
  • DEIF SGC 420 Mk II Lite Single genset controller
  • DEIF SGC 420 Mk II Single genset controller
  • DEIF SGC 420 Single genset controller
  • DEIF SGC 410 Mk II Single genset controller
  • DEIF SGC 410 Single genset controller
  • DEIF SGC 121 Single genset controller
  • DEIF SGC 120 Mk II Single genset controller
  • DEIF AGC 150 Generator Marine Standalone generator controller for marine applications
  • DEIF AGC 150 Engine Drive
  • HIMA HIMax® HART Communication Module X-HART 32 01
  • HIMA HIMax®Analog Output Module X-AO 16 01
  • HIMA HIMax® Digital Output Module X-DO 24 01
  • HIMA HIMax®Digital Output Module X-DO 32 01
  • HIMA HIMax® Analog Input Module X-AI 16 51
  • HIMA HIMatrix Safety-Related Controller DI 32 01
  • HIMA HIMax® Analog input module X-AI 32 01
  • HIMA HIMatrix Safety-Related Controller F3 AIO 8/4 01
  • HIMA HIMax®Relay Module X-D0 12 51
  • HIMA HIMax®Relay Output Module X-DO 12 01
  • HIMA HIMax®Digital Output Module X-DO 32 51
  • HIMA HIMax®Counter Module X-C1 24 51
  • HIMA HIMax®Digital Input Module X-DI 16 01
  • HIMA X-DI 32 52 Digital Input Module for ProximitySwitches and Wired Contact Makers
  • HIMA HIMax® Analog input module X-AI 32 01
  • Beckhoff EL1918 | EtherCAT Terminal, 8-channel digital input, 24 V DC, TwinSAFE, TwinSAFE Logic
  • Beckhoff EL1904 | EtherCAT Terminal, 4-channel digital input, 24 V DC, TwinSAFE
  • Beckhoff EL1899 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 10 µs, ground switching
  • Beckhoff ED1897 | EtherCAT Terminal, 32-channel digital input, 24 V DC, adjustable, ground switching, push-in
  • Beckhoff EL1889 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms, ground switching
  • Beckhoff EL1852 | EtherCAT Terminal, 8-channel digital input
  • Beckhoff ED1819 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 10 µs, push-in
  • HIMA PT 201 | SILworX® Engineer
  • HIMA X-SB 01 HIMax® System Bus Module
  • KEBA Kemro X- Industrial Automation Platform open, modular, easy-to-use
  • Kollmorgen GOLDLINE servomotors
  • Kollmorgen GOLDLINE Motors with SERVOSTAR
  • Kollmorgen PMX Stepper Motors
  • Kollmorgen EKM Series Brushless AC Servo Motors
  • Kollmorgen Goldline® S Series Submersible Servo Motors
  • Kollmorgen Goldline EB and EBH Series
  • Kollmorgen Goldline B/M & BH/MH Series
  • GE Multilin™ 889 Generator Protection System
  • GE Multilin 859 Comprehensive and Compact Motor Protection
  • GE Multilin 869 Overview
  • GE Multilin 869 Comprehensive Motor Protection and Management
  • GE MULTILIN 850 Feeder and Bay Controller Solutions for Industrial and Utility Applications
  • GE Multilin 8 Series Platform Overview
  • GE Multilin™ 845 Transformer Protection System
  • GE The GridBeats™ APS is a family of hardware and software products
  • GE GridBeats™ APS Key Benefits and Applications
  • GE GridBeats™ APS Automation and Protection System
  • GE PQMII Power Quality Meter™
  • BAUMULLER b maXX softdrivePLC - Intelligence in the drive
  • BAUMULLER b maXX 6300 – Single / double-axis modules for maximum scalability
  • BAUMULLER b maXX 3300 - Servo-controller up to 5 kW
  • EATON Effortless control easyE4 nano PLC
  • Woodward LS-5 Series V2 Multi-Breaker Control for complex power management applications
  • EATON XN300 Slice card modular I/O system
  • Beckhoff EL1814 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 10 µs, 3-wire connection
  • Beckhoff ED1829 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms
  • Honeywell X-NRI/EN Network Resource Interface
  • Honeywell x-smart System Management Software
  • Honeywell x-map4p Integrated Audio Player
  • Honeywell X-DA1500 High-efficiency Power Amplifier
  • Honeywell X-DA4125 HIGH EFFICIENCY POWER AMPLIFIER
  • Honeywell X-DA2250 High Efficiency Power Amplifier
  • Honeywell X-DA2250EN-B High Efficiency Power Amplifier
  • Honeywell X-DA1500EN High Efficiency Power Amplifier
  • Honeywell X-DA4125EN High Efficiency Power Amplifier with 24 VDC Backup Power Supply
  • Honeywell X-ND100 Digital Noise Detector
  • Honeywell X-K8 Extension Keypad
  • Honeywell X-K4 Extension Keypad
  • Honeywell X-NPMS Configurable Network Paging Station
  • Honeywell X-DCS3000 Digital Integrated System Manager
  • Honeywell X-DCS2000 Digital Integrated System Manager
  • Automotion LC-4 DC Brushless Motor Control
  • Honeywell X-DCS2000/EN Digital Integrated System Manager 50/60Hz 100-240V #4
  • Kongsberg M3 Sonar® HF with sound velocity sensor
  • Kongsberg M3 Sonar® HF
  • Kongsberg M3 SONAR® - 4000 M WITH SYNCHRONIZATION AND 1PPS
  • Beckhoff ED1839 | EtherCAT Terminal, 16-channel digital input, 24 V DC, adjustable, push-in
  • Beckhoff ED1809 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms, push-in
  • Beckhoff EL1809 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms
  • Beckhoff EL1808 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 3 ms, 2-wire connection
  • Euresys Coaxlink Octo PCIe 3.0 eight-connection CoaXPress frame grabber
  • Euresys Coaxlink Mono CXP-12 LH
  • Euresys Coaxlink Duo CXP-12
  • Beckhoff EL1804 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 3 ms, 3-wire connection
  • Beckhoff EL1512 | EtherCAT Terminal, 2-channel digital input, counter, 24 V DC, 1 kHz
  • Beckhoff EL1502 | EtherCAT Terminal, 2-channel digital input, counter, 24 V DC, 100 kHz
  • Beckhoff EL1262-0050 | EtherCAT Terminal, 2-channel digital input, 5 V DC, 1 µs, oversampling
  • Beckhoff EL1262-0010 | EtherCAT Terminal, 2-channel digital input + 2-channel digital output
  • Beckhoff EL1259 | EtherCAT Terminal, 8-channel digital input + 8-channel digital output, 24 V DC, 1 µs, 0.5 A, multi-timestamp
  • Beckhoff EL1258 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 1 µs, multi-timestamp
  • Beckhoff EL1252-0050 | EtherCAT Terminal, 2-channel digital input, 5 V DC, 1 µs, timestamp
  • Beckhoff EL1252-0010 | EtherCAT Terminal, 2-channel digital input, 24 V DC, 10 µs, timestamp
  • Beckhoff ELX1058 | EtherCAT Terminal, 8-channel digital input, NAMUR, Ex i
  • Beckhoff ELX1054 | EtherCAT Terminal, 4-channel digital input, NAMUR, Ex i
  • Beckhoff EK/EC1xxx, BK1xx0 | EtherCAT Couplers
  • Beckhoff BK1150 | EtherCAT Compact Bus Coupler
  • Beckhoff BK1120 | EtherCAT Bus Coupler for standard Bus Terminals
  • Beckhoff EK1960 | TwinSAFE Compact Controller
  • Beckhoff EK1914 | EtherCAT Coupler with integrated digital standard and safety I/Os
  • Beckhoff EK1828-0010 | EtherCAT Coupler with integrated digital outputs
  • Beckhoff EK1828 | EtherCAT Coupler with integrated digital inputs/outputs
  • Kollmorgen Stainless Steel AKMH Series
  • Kollmorgen AKME Series Servo Motors
  • Kollmorgen Essentials™ Servo Motors
  • Kollmorgen Essentials Motors Offer High Performance at an Exceptional Value
  • Kollmorgen Essentials Drive: Plug In. Power Up. Perform.
How to install and debug this product? Matters needing attention
Where can I download the manual and programming software?
Is it in stock or need to be ordered?
Can you provide technical service?
Where can I order this series?
Do you have product selection list and pre-sale service?