The S-series H1 with integrated power provides local LED indicators to assist in trouble shooting:
2 Yellow LED’s: One per port Indicating the port is enabled and communicating with devices.
2 Red LED’s: One per port indicating to health of power supply as well as monitoring voltage or short circuit faults on the physical layer.
Fault LED: Indicates internal fault with the H1 card.
Power LED: Indicates available LocalBus power.
The Fieldbus I/O Card meets ISA G3 corrosion specifications by using superior electronic components and conformal coating.
One of the most powerful features of FOUNDATION Fieldbus devices is their diagnostic data.

The interface uses a separate terminal block to which the segment wires are connected.
A single interface is used with the 1 wide terminal block in a simplex installation.
Two H1 interfaces can be mounted in adjacent slots using the 2-wide redundant terminal block.
The DeltaV controller recognizes the presence of redundancy and presents both cards as a single pair within the system.
There is no additional user configuration required to set up the redundant H1 hosts.
Segment Power is provided using third party Ff power supplies that also provide segment physical layer diagnostics.
The H1 interface segment wires connect to these power conditions while a separate segment trunk wire connects to the field devices
Recommended Products P/N:
Emerson Ovation 5X00105G10 Control Board
Emerson Ovation 5X00105G03 Control Board
Emerson Ovation 5X00105G01 Control Board
Emerson Ovation 1C31234G01 Contact Input Module
Emerson Ovation 1C31142G01 Contact Input
Emerson Ovation 5A22727G03 Consumables Kit
Emerson Ovation 1C31129G03 Analog Output Card
Emerson Ovation 5A22727G02 Consumables Kit
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
wechat/whatsapp:
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved