A-B 1783-WAPZK9 Stratix 5100 Wireless Access Point/Workgroup Bridge

Features of the Temperature Control Module

The 1746–BTM module provides:

• 4 independent temperature control loops

• autotune PID loops (one loop or any combination of loops can be autotuned while other loops are running)

• a unique start–up algorithm to minimize overshoot

• an isolated thermocouple (J and K) input for each PID loop

• 16–bit analog–to–digital converter resolution (0.1° resolution)

• a heat CV signal (for each PID loop) as a numeric % value

• a cool CV signal (for each PID loop) as a numeric % value

• a heat CV signal (for each PID loop) as a TPO bit

• a cool CV signal (for each PID loop) as a TPO bit

• temperature values in C ° or F °

• self–calibration (external reference required)

• user–selectable high and low alarms with dead band for hysteresis

• input open–circuit detection

EtherNet/IP Network Communication

The EtherNet/IP network offers a full suite of control, configuration and data

collection services by layering the Common Industrial Protocol (CIP) over the

standard Internet protocols, such as TCP/IP and UDP. This combination of

well-accepted standards provides the capability required to both support

information data exchange and control applications.

The EtherNet/IP network also uses commercial, off-the-shelf Ethernet

components and physical media, providing you with a cost-effective plant-floor solution.

For EtherNet/IP communication, you can use these CompactLogix controllers with a built-in EtherNet/IP communication port:

• 1769-L32E CompactLogix controller

• 1769-L35E CompactLogix controller