HIMA HIMax®Relay Output Module X-DO 12 01



Product Description

The X-DO 12 01 relay module is intended for use in the programmable electronic system (PES)

HIMax.

The module can be inserted into any of the base plate slots with the exception of the slots

reserved for system bus modules. For more information, see System Manual (HI 801 001 E).

The module is equipped with 12 potential-free relay outputs with forcibly guided contacts. The

relay outputs are suitable for connecting ohmic and inductive loads.

The module has been certified by the TÜV for safety-related applications up to SIL 3

(IEC 61508. IEC 61511 and IEC 62061) as well as Cat. 4 and PL e (EN ISO 13849-1).

Refer to the HIMax Safety Manual (HI 801 003 E) for more information on the standards used to

test and certify the module and the HIMax system.

Reaction in the Event of a Fault

If the safety-related processor system of the module detects a module fault during operation, the

module adopts the safe state and all the outputs are de-energized in accordance with the 'de-

energize to trip principle'. If a channel fault occurs, only the affected channel is switched off.

The module activates the Error LED on the front plate.

X-CI 24 51 is a NonSIL counter module intended for use in the programmable electronic system

(PES) HIMax.

The module can be inserted into any of the base plate slots with the exception of the slots

reserved for system bus modules. For more information, see System Manual (HI 801 001 E).

The module is used to count the pulses, to measure the frequency and the rotational speed

and, if defined, to recognize the rotation direction. Two channels are required to use the

recognition of rotation direction function, see Chapter 4.5.4.

Refer to the HIMax Safety Manual (HI 801 003 E) for more information on the standards used to

test and certify the modules and the HIMax system.

The X-DI 16 01 digital input module is intended for use in the programmable electronic

system (PES) HIMax.

The module can be inserted in any of the base plate slots with the exception of the slots

reserved for system bus modules. For more information, refer to the System Manual

(HI 801 001 E).

The module is used to evaluate up to 16 digital input signals. The digital inputs are current

sinking logic for 48 VAC to 120 VAC signals in accordance with IEC 61131-2 ( based on

type 1).

The module has been certified by the TÜV for safety-related applications up to SIL 3

(IEC 61508. IEC 61511 and IEC 62061), Cat. 4 (EN 954-1) and PL e (EN ISO 13849-1).

Refer to the HIMax Safety Manual (HI 801 003 E) for more information on the standards

used to test and certify the modules and the HIMax system.

Safety Function

The module evaluates the digital input signals and provides them to the user program.

The safety function is performed in accordance with SIL 3.

Reaction in the Event of a Fault

If a fault occurs, the module adopts the safe state and the assigned input variables transmit

the initial value to the user program.

The initial values must be set to 0 to ensure that the input variables transmit the value 0 to

the user program if a fault occurs.

The module activates the Error LED on the front plate.

Communication Features of HIQuad X

A new communication module F-COM 01 comes included with HIQuad X. It supports the consistent

HIMA security concept. With HIQuad X, you have new opportunities as well as well-known existing

communication paths. Additionally, HIQuad X increases the availability of the communication to

redundant third-party systems.

You can connect HIQuad X systems to each other via the HIMA safety protocol SafeEthernet. Also,

HIMax, HIMatrix systems and RIOs can be combined safely. To establish a safety-related connection to

existing HIQuad installations, the protocol HIPRO-S V2 is implemented in HIQuad X.

• 2 Ethernet interfaces on F-CPU 01 and F-COM 01.

• Interference-free, peer-to-peer connections between each F-CPU 01 and each of the up to

• 10x F-COM 01 modules.

• The whole IP address range can be used.

• Enhanced communication options such as subnet masks and virtual LAN to segregate nets can

be programmed.

• One serial interface per F-COM 01.

ALSTOM 029.076164 PC BOARD MODULE

Alstom Safety Hard Hat Application Engineering

ALSTOM MOTPRO MCHNM PROTECTION RELAY MCHNM01H1AB0500A

GEC ALSTOM RFC15001006A POWER SUPPLY MODULE

GEC ALSTOM KBCH13001H15MEL Transformer Differential Protection Relay KBCH

ALSTOM CEGELEC ALSPA 20X4264/60C , 20X4264A1L

Alstom Low Burden Tripping Relay MVAJ13L1GB0771A

ALSTOM MVAJ105RA0802A Protection Relay

Micom Alstom P143 Feeder Management Relay P143311A1A0040A

CONVERTEAM 029.211-759 / 029211759

CONVERTEAM 8321-6002 / 83216002

CONVERTEAM 029.223-006 / 029223006

CONVERTEAM 029.226681 / 029226681 

Alstom 70B002 Pcb Circuit Board Rev B