DEIF SGC 410 Single Genset Controller

The SGC 410 controller is a modern island genset controller with a user-friendly

HMI and full graphic LCD.

It includes voltage and frequency measurement of the genset as well as electrical

load measurement (True RMS).

Configurable analog and digital inputs/outputs are provided for various functions.

Remote communication is available via RS-485 Modbus and CAN ports.

The genset can be started and stopped remotely using the remote start/stop

function.

Deep sleep mode is a useful feature that extends battery life by suspending the

normal function of the controller when the genset is shut down.

Monitor engine safety, electrical load, on-site standby battery voltage, and shelter

temperature (to reduce fuel consumption).

Configure parameters from a PC using the DEIF Smart Connect utility software.

Connects to the PC via the controller's USB Type B port.

Achieve Precision with Automatic Voltage Control

The DVC 550 Digital Voltage Controller is designed to provide precise automatic voltage

control for alternators with SHUNT, AREP, or PMG excitation. This advanced controller

monitors and regulates the alternator output, ensuring stable and reliable performance.

With rated field current up to 7 A and up to 277V AC, the DVC 550 includes several

protections and functions to keep your alternator running safely and efficiently.

Optimize Your Power Systems with DEIF's DVC 550

DEIF's DVC 550 controller can significantly improve genset performance, delivering up

to a 10% increase in normal load impact capability. Suitable for critical power, IPP,

and rental segments, this digital AVR handles larger load-steps within the same

frequency/voltage boundaries compared to analogue AVRs.The embedded help

features enhance performance, reducing downtime and service costs.

Dehumidify and dry your genset with integrated ventilation functions

Condensation build-up during idle time is a common problem in tropical climates.

Use the genset ventilation mode to prevent condensation forming on the windings

by removing built-up humid air using the alternator fan. Power generation is postponed

until the humidity levels are safe. Condensation on the windings can be removed using

the genset drying mode. During drying mode heat generated from a controlled internal

circulating in the alternator winding is used to evaporate condensation on the windings.

The genset will be connected to the busbar when it is safe to do so.

Maximum control with an integrated genset controller solution

The DVC 550’s built-in J1939 based communication offers an exclusive communication

channel to DEIF’s advanced controllers. Providing a high number of alternator data for

display, broadcast or predictive maintenance, the J1939 built-in communication is unique

on the market. You can quickly swap between nominal voltage and or frequency setting

 for a generator. Using CAN bus-based communication for voltage regulation reduces

the potential number of failure sources.

Use the DVC 550 together with the AGC-4 Mk II controller to maximise your benefits.

Deif Delomatic 4 DGU 0003 Controller 24V DC

Deif PPM-3 SG Protection And Power Management

DEIF | PPU300 | ML300 | MULTI-LINE 300 | 921002392.10 | DISPLAY UNIT

DEIF AGC Plant Management Genset Controller 920025558.10

Deif PPM/DGM Protection And Power Management 100099054.280

DEIF PPM-3 DG PROTECTION AND POWER MANAGEMENT COMPLETE SET

DEIF AGC-4 Controller with DU-2/MKIII DisplayAutomatic Gen-set controller 24VDC

DEIF DELOMATIC-3 DGU 3 Control Panel 1044220060E 1044220070E 1044220080E

DEIF AGC-4 Controller with DU-2/MKIII DisplayAutomatic Gen-set controller 24VDC

DEIF AGC 252 advanced Genset Controller 2912420010.39 Options -C2-H2-N-I1

DEIF AGC 252 advanced Genset Controller 2912420010.39 Options -C2-N

Deif OPM-1 Output Module 1044220080E

DEIF DELOMATIC 4 DGU 0001 CONTROLLER