Emerson R2U2N1F1A2T0A RXi2-UP IPC, Quad Core XEON E3-1505Lv6

I/O Card Redundancy

Redundant I/O cards are available for critical applications.

The same card can be used in simplex or redundant

applications. When installed on a two-wide redundant terminal

block, the cards are recognized as a redundant pair by the

controller. The controller scans each card and determines which

card is acting as the active interface. When a fault is detected,

the system automatically switches to the standby I/O card.

DeltaV Control modules reference simplex and redundant

I/O channels identically and there is no special configuration

required to take advantage of redundancy.

Events that can cause a switchover include.

„ Hardware failure within the active card.

„ Communications failure between the active card and the controller.

„ Detection of a fault in the field wiring.

Switchover of a redundant I/O card is completed within

two scans of the I/O bus. Make-before-break contacts ensure

digital field instruments remain powered and the process

is undisturbed. Analog output signals are briefly driven by

both cards for < 5 ms during switchover of the card.

Hardware Alerts automatically report hardware integrity errors

for both the primary and secondary cards. Any event that

causes a switchover is also reported automatically through the

system hardware alerts and is logged in the Event Chronicle.

Recommended Products P/N：

EMERSON DeltaV KJ1502X1-BA2 BULK AC TO 24 VDC POWER SUPPLY

EMERSON DeltaV KJ1611X1-EF1 Controller MODULE

EMERSON DeltaV KJ2101X1-BA1 PROVOX M3+ CONT CAR

EMERSON DeltaV KJ2101X1-CA1 PROVOX M3 CONT CAR

EMERSON DeltaV KJ2201X1-BA1  Logic Solver - SLS 1508

EMERSON DeltaV KJ2201X1-HA1  Simplex SLS Terminal Block

EMERSON DeltaV KJ2201X1-JA1  Redundant SLS Terminal Block

EMERSON DeltaV KJ2221X1-BA1 SISNet Repeater

EMERSON DeltaV KJ2221X1-EA1  SISNet Repeater Carrier

EMERSON DeltaV KJ2222X1-BA1  SISNet Distance Extender

EMERSON DeltaV KJ2231X1-BA1  Auxiliary Relay ETA-Direct Module