The ED3274 analog input terminal enables the measurement of
temperatures with resistance thermometers (RTD) or thermocouples
(TC) on four channels. Each channel can be configured individually,
allowing for mixed operation of RTD and TC.

The measured values can be output as resistance or voltage values
or converted directly into a temperature. All common sensor types
are supported.
For temperature measurement with resistance thermometers, sensors
in a 2. 3. or 4-wire system can be connected. A cold junction
compensation is integrated in the terminal for temperature
measurement with thermocouples. This internal measurement can
be switched off so that an external cold junction can be used.
The ED series EtherCAT Terminals have push-in connection technology
which makes wiring easy and tool-free.
wechat/whatsapp:
+86-181-44100-983
Email: kongjiangauto@163.com
Copyright © 2009 - 2026 Cld , All Rights Reserved K-JIANG All rights reserved