Eaton Bussmann series Quik-Spec Coordination Panel (QSCP)

The Quik-Spec Coordination Panelboard (QSCP) makes selective

coordination easy. Now available with up to 600 A mains and up

to 200 A branch disconnects as well as advanced and integrated

surge options.

Overview

Core features

Easy-to-Spec

• Eaton's Bid Manager makes specifying, pricing and ordering

simple, fast and virtually error free. Just log in, select the ratings,

features and options you want, and instantly get back pricing for

any Coordination Panelboard possible. Contact your Bussmann

series products representative for access.

Saves Time

• Enclosure ships within one week of order so installation can start

fast. Interior with fuses ships later for jobsite installation. Spare fuses

included with chassis shipment so replacements are always on hand.

• Specify Quik-Ship when you order and your product will ship within

10 business days. Available on all NEMA 1 enclosure configurations -

just make sure your Bussmann series product representative knows

you want Quik-Ship.

Flexible Configurations – Up to 600Vac/600 Amp/200kA SCCR,

or 125Vdc/600 Amp/100kA SCCR. 125Vdc rating applicable on

MLO panels only, up to 80A.

• 30. 60. 100. 200. 225. 400 and 600 A main ratings

• 125 Vdc rating ideal for utility and petro-chem control circuits or UPS

circuits

• 1 to 100 A fuse ratings to closely match loads

• Available in fused or non-fused main disconnect switch, or MLO (Main

Lug Only) configurations with a choice of 18. 30. 42. 60. 72 and 84 branch

positions, up to 200 A, in NEMA 1 or 3R enclosures to easily meet branch

or service panel installation needs

• Feed through lugs or fused loadside disconnect available

• Same size footprint as traditional circuit breaker panelboards

• 20” W x 5” D x various heights (depending on configuration), See data

sheet for specific dimensions/configurations

Addresses NEC® Selective Coordination Requirements

• This cULus Listed panelboard makes it easy to provide systems that

comply with NEC® Selective Coordination Requirements for Emergency,

Legally Required Standby, Healthcare Essential Electrical and Critical

Operation Power Systems (COPS) per 700.27. 701.18. 517.26 and 708.54

• Full fuse-system selective coordination is easy from source to branch.

Just follow published fuse selective coordination ratios – no need for

plotting time-current curves or expensive studies

Increases Safety

• The QSCP uses the Bussmann series Compact Circuit Protector Base

(CCPB) for its branch circuit disconnect up to 100 amps and the Compact

Circuit Protector (CCP) for its 200 amp branch circuit disconnect. Both are

used with Bussmann series Class CF CUBEFuse fuses

• Both CCP and CCPB are disconnect rated to provide a means for load

isolation. Ampacity rejections at 15. 20. 30. 40. 50. 60. 70. 90. 100 and

200 A coincide with standard conductor sizes to help prevent overfusing

• Local open fuse indication on branch circuit device and optional indicating

CUBEFuse

• Lockout/tagout provision eases OSHA compliance

• Lock-On provision helps meet requirements for emergency circuits

• High fuse interrupting rating and up to 200 kA assembly SCCR ratings

easily exceed most available fault current levels to help ensure compliance

with NEC® 110.9 and 110.10. Current-limitation of a fused solution also

reduces arc-flash hazards and minimizes damage to equipment and circuits.