The EL4374 analog input terminal combines two analog inputs
and two analog outputs that can be individually parameterized
by the controller/TwinCAT via CoE for current or voltage operation.
Depending on the setting, the channels process signals with 2
ksps in the range of -10/0 to +10 V or -20/0/+4 to +20 mA.

The inputs are digitized with a 16-bit resolution and electrically
isolated before being transmitted to the higher-level automation
device. As for the 16-bit-resolution outputs, these operate in the
same way. With a technical measuring range of ±107% of the
nominal range, the terminal also supports commissioning with
sensor values in the limit range and the evaluation according to
NAMUR NE43. The outputs are also capable of delivering up to
107% of their capacity.
Special features:
• combined input/output terminal: 10 V/20 mA
• 107% measurement/output range
• high output power at 20 mA: load up to 750 Ohm
• 2 ksps conversion rate per channel for standard automation tasks
wechat/whatsapp:
+86-181-44100-983
Email: kongjiangauto@163.com
Copyright © 2009 - 2026 Cld , All Rights Reserved K-JIANG All rights reserved