Emerson R2B0N8N2N3A0A RXi2-BP Industrial PC

The standard modular components typically consist of the following:

• Electronics module

• Personality module

• Base Unit (containing the field terminations)

The relay output modular components consist of the following:

• Electronics module

• Base Unit (containing the field terminations)

Two H1 interfaces can be mounted in adjacent slots using the 2-wide redundant terminal block. 

The DeltaV controller recognizes the presence of redundancy and presents both cards as a single pair within the system. 

There is no additional user configuration required to set up the redundant H1 hosts. 

Segment Power is provided using third party Ff power supplies that also provide segment physical layer diagnostics. 

The H1 interface segment wires connect to these power conditions while a separate segment trunk wire connects to the field devices

PK Controller: Now Supporting Native PROFINET

PROFINET is an open industrial Ethernet solution and is based on international standards. 

It is a communication protocol designed to exchange data between controllers and devices in an industrial automation network.

And now, both the innovative PK Controller and new PK Flex Controller support native PROFINET, 

helping customers enhance their performance and meet the requirements of most of their time-critical applications.

You do not need special hardware or configuration to use PROFINET; 

the PK Flex Controller and PK Controller are equipped with PROFINET capability.

„ PK Flex Controller is a PROFINET controller and will connect with up to 250 devices such as PLCs, Drives,Remote I/O, transmitters and valves.

„ PROFINET in the PK Flex Controller is compliant with version 2.3 and CC-A functionality.

The Ovation I/O modules are locked into base units. These base units are housed in

the Controller cabinets where they are mounted on DIN rails and wired to the appropriate field devices.