Emerson R2B0N0NIN3A0A RXi2-BP Industrial PC

The standard modular components typically consist of the following:

• Electronics module

• Personality module

• Base Unit (containing the field terminations)

The relay output modular components consist of the following:

• Electronics module

• Base Unit (containing the field terminations)

Two H1 interfaces can be mounted in adjacent slots using the 2-wide redundant terminal block. 

The DeltaV controller recognizes the presence of redundancy and presents both cards as a single pair within the system. 

There is no additional user configuration required to set up the redundant H1 hosts. 

Segment Power is provided using third party Ff power supplies that also provide segment physical layer diagnostics. 

The H1 interface segment wires connect to these power conditions while a separate segment trunk wire connects to the field devices

Our Business

Emerson’s industry-leading portfolio enables us to identify and confront the challenges of an 

increasingly complex and unpredictable marketplace from a position of strength, 

driving near- and long-term value as a trusted partner for our customers.

The FOUNDATION Fieldbus H1 interface is packaged in a small form factor enclosure and installs on any I/O slot of the S-series horizontal carriers. 

The interface uses a separate terminal block to which the segment wires are connected. 

A single interface is used with the 1 wide terminal block in a simplex installation.