Power Engineering 
K-JIANG
Product
Article
NameDescriptionContent
English 简体中文
  • GE Multilin 750-P5-G5-S5-HI-A20-G 750 Management Relay
  • GE Multilin 750-P5-G5-D5-HI-A20-R 750/760 Feeder Mgmt Relay Series
  • GE Multilin 750-P5-G5-D5-HI-A20-G Management Relay
  • GE Multilin 750-P5-G1-D5-HI-A20-R Multilin 1A Zero Sequence Current Inputs
  • GE Multilin 750-P1-G1-S1-HI-A20-R-T-H Feeder Management Relays
  • HIMA DI 24 01 HIMatrix Safety-Related Controller
  • HIMA DIO 24/16 01 HIMatrix Safety-Related Controller
  • HIMA X-CI 24 51 HIMax® Counter Module
  • HIMA X-DI 64 51 HIMax®Digital Input Module
  • HIMA X-DI 32 51 HIMax®Digital Input Module
  • HIMA X-DI 32 05 HIMax®Digital Input Module
  • HIMA X-MIO 7/6 01 HIMax®Overspeed Trip Module
  • HIMA X-AI 32 02 HIMax®Analog Input Module
  • HIMA X-CI 24 01 HIMax®Counter Module
  • HIMA HIMax® X-DI 32 02 Digital Input Module
  • HIMA HIMax® X-COM 01 E Communication Module
  • HIMax HART solution from HIMA
  • Beckhoff ED2504 | EtherCAT Terminal, 4-channel PWM output, 5…24 V DC, 1.5 A, push-in, with 4 x digital input
  • Beckhoff EL2262 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, oversampling
  • Beckhoff EL2258 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A, multi-timestamp
  • Beckhoff EL2252 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, timestamp
  • Beckhoff EL2212 | EtherCAT Terminal, 2-channel digital output, 24…72 V DC, 10 A, overexcitation, multi-timestamp
  • Beckhoff EL2202-0100 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, push-pull, tristate, distributed clocks
  • Beckhoff EL2202 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, push-pull, tristate
  • Beckhoff EL2068 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A, with channel diagnostics
  • Beckhoff EL2044 | EtherCAT Terminal, 4-channel digital output, 24 V DC, 2 A, with extended diagnostics
  • Beckhoff ED2034 | EtherCAT Terminal, 4-channel digital output, 24 V DC, 2 A, push-in, with channel diagnostics
  • Beckhoff EL2032 EtherCAT Terminal, 2-channel digital output, 24 V DC, 2 A, with diagnostics
  • Beckhoff EL2014 | EtherCAT Terminal, 4-channel digital output, 24 V DC, 0.5 A, with extended diagnostics
  • Beckhoff ELX2008 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 30 mA, Ex i
  • Beckhoff ED2008 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A, push-in
  • Beckhoff ELX2002 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 45 mA, Ex i
  • TMEIC TM21-TG Series 2-Pole Generator
  • TMEIC TM21-TG Series 4-Pole Generator for Turbine Drive
  • TMEIC Turbine Generator Empowering the Future
  • TMEIC Air-Cooled Type Synchronous Generators
  • TMEIC TMdrive-XL85 Medium Voltage AC Drives
  • TMEIC TMdrive-30 Medium Voltage AC Drives
  • TMEIC TMdrive-MVG2 Medium Voltage AC Drives
  • TMEIC TMdrive-70 Medium Voltage AC Drives
  • TMEIC TMdrive-50 Medium Voltage AC Drives
  • TMEIC TMdrive-MVe2 Medium Voltage AC Drives
  • TMEIC TMdrive-XL80 Medium Voltage AC Drives
  • TMEIC TMdrive-XL75 Medium Voltage AC Drives
  • TMEIC TMdrive-XL55 Medium Voltage AC Drives
  • TMEIC TMdrive-70e2 Medium Voltage AC Drives
  • TMEIC TMdrive-Guardian Medium Voltage AC Drives
  • TMEIC TMdrive®-10e2 DP DC Drives
  • TMEIC TMdrive-DCe2 DC Drives
  • TMEIC Dynamic VAR Compensation – Dyna-VAR™
  • TMEIC PV Inverters SOLAR WARE 2500
  • TMEIC PV Inverters SOLAR WARE 2700
  • TMEIC PV Inverters SOLAR WARE 3200
  • TMEIC Power Plant Controller
  • GE T60 Transformer Management Relay
  • GE Multilin™ G60 Comprehensive Protection for Generators
  • DEIF MVR-G257 Features Protection Functions
  • DEIF MVR-G215 Features Protection Functions
  • DEIF MVR-G257 Generator Differential Protection
  • DEIF MVR-G215 Generator Protection
  • DEIF MVR-F255 Features Protection Functions
  • DEIF MVR-F255 Directional Feeder Protection
  • DEIF MVR-F201 Basic Feeder Protection
  • DEIF USW-3 DEIF utility software
  • DEIF CIO 116 CAN bus-based I/O module
  • DEIF CIO 208 CAN bus-based I/O module
  • DEIF CIO 308 CAN bus-based I/O module
  • DEIF AGC 150 Mains Advanced Genset Controller
  • DEIF SGC 421 Mk II Single genset controller
  • DEIF SGC 421 Single genset controller
  • DEIF SGC 420 Mk II Lite Single genset controller
  • DEIF SGC 420 Mk II Single genset controller
  • DEIF SGC 420 Single genset controller
  • DEIF SGC 410 Mk II Single genset controller
  • DEIF SGC 410 Single genset controller
  • DEIF SGC 121 Single genset controller
  • DEIF SGC 120 Mk II Single genset controller
  • DEIF AGC 150 Generator Marine Standalone generator controller for marine applications
  • DEIF AGC 150 Engine Drive
  • HIMA HIMax® HART Communication Module X-HART 32 01
  • HIMA HIMax®Analog Output Module X-AO 16 01
  • HIMA HIMax® Digital Output Module X-DO 24 01
  • HIMA HIMax®Digital Output Module X-DO 32 01
  • HIMA HIMax® Analog Input Module X-AI 16 51
  • HIMA HIMatrix Safety-Related Controller DI 32 01
  • HIMA HIMax® Analog input module X-AI 32 01
  • HIMA HIMatrix Safety-Related Controller F3 AIO 8/4 01
  • HIMA HIMax®Relay Module X-D0 12 51
  • HIMA HIMax®Relay Output Module X-DO 12 01
  • HIMA HIMax®Digital Output Module X-DO 32 51
  • HIMA HIMax®Counter Module X-C1 24 51
  • HIMA HIMax®Digital Input Module X-DI 16 01
  • HIMA X-DI 32 52 Digital Input Module for ProximitySwitches and Wired Contact Makers
  • HIMA HIMax® Analog input module X-AI 32 01
  • Beckhoff EL1918 | EtherCAT Terminal, 8-channel digital input, 24 V DC, TwinSAFE, TwinSAFE Logic
  • Beckhoff EL1904 | EtherCAT Terminal, 4-channel digital input, 24 V DC, TwinSAFE
  • Beckhoff EL1899 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 10 µs, ground switching
  • Beckhoff ED1897 | EtherCAT Terminal, 32-channel digital input, 24 V DC, adjustable, ground switching, push-in
  • Beckhoff EL1889 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms, ground switching
  • Beckhoff EL1852 | EtherCAT Terminal, 8-channel digital input
  • Beckhoff ED1819 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 10 µs, push-in
  • HIMA PT 201 | SILworX® Engineer
  • HIMA X-SB 01 HIMax® System Bus Module
  • KEBA Kemro X- Industrial Automation Platform open, modular, easy-to-use
  • Kollmorgen GOLDLINE servomotors
Home ⊙ Product ⊙ Woodward V45TV-2010-FURXM-X-S-X 9907-1677 Industrial Turbine Actuator
Current Location:

E-mail

Password
Register Forgot password?
Woodward V45TV-2010-FURXM-X-S-X 9907-1677 Industrial Turbine Actuator
❤ Add to collection

Woodward V45TV-2010-FURXM-X-S-X 9907-1677 Industrial Turbine Actuator

+86-18144100983
kongjiangauto@163.com
wind, petroleum, chemical, natural gas, Marine, mining, aviation, electronics, steel, nuclear power, electric power, coking, air separation and so on
PLC, DCS, servo, analog, Ethernet, digital, redundant module, tension system, excitation, generator management, human-machine interface, detection card, sensor, AC drive, etc
U.S.＄9414.00
U.S.＄5504.00
Weight：3.600KG
Quantity：
(Inventory: 5)
Buy now
Add to cart
Product parameters
  • Tell:+86-18144100983
  • email:kongjiangauto@163.com
  • Application:wind/ petroleum/ chemical/ natural gas/ Marine/ mining/ aviation/ electronics/ steel/ nuclear power/ electric power/ coking/ air separation and so on
  • Series:PLC/ DCS/ servo/ analog/ Ethernet/ digital/ redundant module/ tension system/ excitation/ generator management/ human-machine interface/ detection card/ sensor/ AC drive/ etc
Feature

In a TMR5200 based system, each Kernel CPU provides Real Time Network (RTN) capability for

expanding to other racks using Ethernet port 4 (RJ45). This RTN port communicates between the main

chassis CPU's and any Remote RTN modules located in an expansion chassis. The GAP software

application defines the expansion racks, their I/O modules, and the use of the RTN port (GAP block is

RTN).

Up to two Remote RTN modules may be installed into each MicroNet Plus 8/14 expansion chassis (only

one RTN for 6/12 slot expansion chassis). When initialized by the main chassis CPU, the Remote RTN

modules will acquire either a SYSCON or STANDBY status. The Remote RTN module that becomes

SYSCON will control the expansion chassis where it is located. It will synchronize with the STANDBY

Remote RTN module and perform any redundancy functions as necessary. Input and output data from all

I/O modules will be managed appropriately and made available to the GAP Application running in the

main-chassis CPUs.

For redundant operation, the control can use any combination of power supplies.

The power supplies can only be installed into slots PS1 (power supply #1) and PS2 (power supply #2). If

redundant power supplies are not needed, blanking plates must be installed in the slots not being used.

Branch circuit fuses, circuit breakers, and wiring must meet appropriate codes and authorities having

jurisdiction for the specific country (CE, UL, etc.). See Table 4-3 for maximum recommended fuse or

breaker ratings. Do not connect more than one main power supply to any one fuse or circuit breaker. Use

only the wire sizes specified in Table 4-3. which meet local code requirements. Time delay fuses or circuit

breakers must be used to prevent nuisance trips.

In the event that on supply needs to be replaced, the recommended method for changing

Power Modules is with the power off (to the module being removed and the module being inserted).

The system will tolerate this “cold swap” method without failure.

Woodward THICK DROP, 7/8' MALE TO PIGTAIL, (3M) 5417-1119

Woodward THICK DROP, 7/8" MALE TO PIGTAIL, (6M) 5417-1281

Woodward MICRONET DROP, M12 FEMALE TO 7/8' MALE, (0.5M) 5417-1120

Woodward MICRONET DROP, 7/8' MALE TO M12 FEMALE, (1M) 5417-1127

Woodward MID TRUNK CABLE (0.5M) 5417-1145

Woodward MID TRUNK CABLE (6M) 5417-1150

Woodward MicroNet TMR Hardware Kit with 4565-1115, 120V AC/DC 8262-1145

Woodward MicroNet TMR Hardware Kit with 4565-1115, 220V AC 8262-1146

Woodward MicroNet TMR Hardware Kit with 4565-1115, 24 VDC 8262-1147

Woodward MicroNet TMR Hardware Kit with 4565-253, 120V AC/DC 8262-1148

Woodward MICRONET DROP, 7/8' MALE TO M12 FEMALE, (2M) 5417-1128

  • HIMA DI 24 01 HIMatrix Safety-Related Controller
  • HIMA DIO 24/16 01 HIMatrix Safety-Related Controller
  • HIMA X-CI 24 51 HIMax® Counter Module
  • HIMA X-DI 64 51 HIMax®Digital Input Module
  • HIMA X-DI 32 51 HIMax®Digital Input Module
  • HIMA X-DI 32 05 HIMax®Digital Input Module
  • HIMA X-MIO 7/6 01 HIMax®Overspeed Trip Module
  • HIMA X-AI 32 02 HIMax®Analog Input Module
  • HIMA X-CI 24 01 HIMax®Counter Module
  • HIMA HIMax® X-DI 32 02 Digital Input Module
  • HIMA HIMax® X-COM 01 E Communication Module
  • HIMax HART solution from HIMA
  • Beckhoff ED2504 | EtherCAT Terminal, 4-channel PWM output, 5…24 V DC, 1.5 A, push-in, with 4 x digital input
  • Beckhoff EL2262 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, oversampling
  • Beckhoff EL2258 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A, multi-timestamp
  • Beckhoff EL2252 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, timestamp
  • Beckhoff EL2212 | EtherCAT Terminal, 2-channel digital output, 24…72 V DC, 10 A, overexcitation, multi-timestamp
  • Beckhoff EL2202-0100 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, push-pull, tristate, distributed clocks
  • Beckhoff EL2202 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, push-pull, tristate
  • Beckhoff EL2068 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A, with channel diagnostics
  • Beckhoff EL2044 | EtherCAT Terminal, 4-channel digital output, 24 V DC, 2 A, with extended diagnostics
  • Beckhoff ED2034 | EtherCAT Terminal, 4-channel digital output, 24 V DC, 2 A, push-in, with channel diagnostics
  • Beckhoff EL2032 EtherCAT Terminal, 2-channel digital output, 24 V DC, 2 A, with diagnostics
  • Beckhoff EL2014 | EtherCAT Terminal, 4-channel digital output, 24 V DC, 0.5 A, with extended diagnostics
  • Beckhoff ELX2008 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 30 mA, Ex i
  • Beckhoff ED2008 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A, push-in
  • Beckhoff ELX2002 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 45 mA, Ex i
  • TMEIC TM21-TG Series 2-Pole Generator
  • TMEIC TM21-TG Series 4-Pole Generator for Turbine Drive
  • TMEIC Turbine Generator Empowering the Future
  • TMEIC Air-Cooled Type Synchronous Generators
  • TMEIC TMdrive-XL85 Medium Voltage AC Drives
  • TMEIC TMdrive-30 Medium Voltage AC Drives
  • TMEIC TMdrive-MVG2 Medium Voltage AC Drives
  • TMEIC TMdrive-70 Medium Voltage AC Drives
  • TMEIC TMdrive-50 Medium Voltage AC Drives
  • TMEIC TMdrive-MVe2 Medium Voltage AC Drives
  • TMEIC TMdrive-XL80 Medium Voltage AC Drives
  • TMEIC TMdrive-XL75 Medium Voltage AC Drives
  • TMEIC TMdrive-XL55 Medium Voltage AC Drives
  • TMEIC TMdrive-70e2 Medium Voltage AC Drives
  • TMEIC TMdrive-Guardian Medium Voltage AC Drives
  • TMEIC TMdrive®-10e2 DP DC Drives
  • TMEIC TMdrive-DCe2 DC Drives
  • TMEIC Dynamic VAR Compensation – Dyna-VAR™
  • TMEIC PV Inverters SOLAR WARE 2500
  • TMEIC PV Inverters SOLAR WARE 2700
  • TMEIC PV Inverters SOLAR WARE 3200
  • TMEIC Power Plant Controller
  • GE T60 Transformer Management Relay
  • GE Multilin™ G60 Comprehensive Protection for Generators
  • DEIF MVR-G257 Features Protection Functions
  • DEIF MVR-G257 Generator Differential Protection
  • DEIF MVR-G215 Generator Protection
  • DEIF MVR-G215 Features Protection Functions
  • DEIF MVR-F255 Features Protection Functions
  • DEIF MVR-F255 Directional Feeder Protection
  • DEIF MVR-F201 Basic Feeder Protection
  • DEIF USW-3 DEIF utility software
  • DEIF CIO 116 CAN bus-based I/O module
  • DEIF CIO 208 CAN bus-based I/O module
  • DEIF CIO 308 CAN bus-based I/O module
  • DEIF AGC 150 Mains Advanced Genset Controller
  • DEIF SGC 421 Mk II Single genset controller
  • DEIF SGC 421 Single genset controller
  • DEIF SGC 420 Mk II Lite Single genset controller
  • DEIF SGC 420 Mk II Single genset controller
  • DEIF SGC 420 Single genset controller
  • DEIF SGC 410 Mk II Single genset controller
  • DEIF SGC 410 Single genset controller
  • DEIF SGC 121 Single genset controller
  • DEIF SGC 120 Mk II Single genset controller
  • DEIF AGC 150 Generator Marine Standalone generator controller for marine applications
  • DEIF AGC 150 Engine Drive
  • HIMA HIMax® HART Communication Module X-HART 32 01
  • HIMA HIMax®Analog Output Module X-AO 16 01
  • HIMA HIMax® Digital Output Module X-DO 24 01
  • HIMA HIMax®Digital Output Module X-DO 32 01
  • HIMA HIMax® Analog Input Module X-AI 16 51
  • HIMA HIMatrix Safety-Related Controller DI 32 01
  • HIMA HIMax® Analog input module X-AI 32 01
  • HIMA HIMatrix Safety-Related Controller F3 AIO 8/4 01
  • HIMA HIMax®Relay Module X-D0 12 51
  • HIMA HIMax®Relay Output Module X-DO 12 01
  • HIMA HIMax®Digital Output Module X-DO 32 51
  • HIMA HIMax®Counter Module X-C1 24 51
  • HIMA HIMax®Digital Input Module X-DI 16 01
  • HIMA X-DI 32 52 Digital Input Module for ProximitySwitches and Wired Contact Makers
  • HIMA HIMax® Analog input module X-AI 32 01
  • Beckhoff EL1918 | EtherCAT Terminal, 8-channel digital input, 24 V DC, TwinSAFE, TwinSAFE Logic
  • Beckhoff EL1904 | EtherCAT Terminal, 4-channel digital input, 24 V DC, TwinSAFE
  • Beckhoff EL1899 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 10 µs, ground switching
  • Beckhoff ED1897 | EtherCAT Terminal, 32-channel digital input, 24 V DC, adjustable, ground switching, push-in
  • Beckhoff EL1889 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms, ground switching
  • Beckhoff EL1852 | EtherCAT Terminal, 8-channel digital input
  • Beckhoff ED1819 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 10 µs, push-in
  • HIMA PT 201 | SILworX® Engineer
  • HIMA X-SB 01 HIMax® System Bus Module
  • KEBA Kemro X- Industrial Automation Platform open, modular, easy-to-use
  • Kollmorgen GOLDLINE servomotors
  • Kollmorgen GOLDLINE Motors with SERVOSTAR
  • Kollmorgen PMX Stepper Motors
  • Kollmorgen EKM Series Brushless AC Servo Motors
  • Kollmorgen Goldline® S Series Submersible Servo Motors
  • Kollmorgen Goldline EB and EBH Series
  • Kollmorgen Goldline B/M & BH/MH Series
  • GE Multilin™ 889 Generator Protection System
  • GE Multilin 859 Comprehensive and Compact Motor Protection
  • GE Multilin 869 Overview
  • GE Multilin 869 Comprehensive Motor Protection and Management
  • GE MULTILIN 850 Feeder and Bay Controller Solutions for Industrial and Utility Applications
  • GE Multilin 8 Series Platform Overview
  • GE Multilin™ 845 Transformer Protection System
  • GE The GridBeats™ APS is a family of hardware and software products
  • GE GridBeats™ APS Key Benefits and Applications
  • GE GridBeats™ APS Automation and Protection System
  • GE PQMII Power Quality Meter™
  • BAUMULLER b maXX softdrivePLC - Intelligence in the drive
  • BAUMULLER b maXX 6300 – Single / double-axis modules for maximum scalability
  • BAUMULLER b maXX 3300 - Servo-controller up to 5 kW
  • EATON Effortless control easyE4 nano PLC
  • Woodward LS-5 Series V2 Multi-Breaker Control for complex power management applications
  • EATON XN300 Slice card modular I/O system
  • Beckhoff EL1814 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 10 µs, 3-wire connection
  • Beckhoff ED1829 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms
  • Honeywell X-NRI/EN Network Resource Interface
  • Honeywell x-smart System Management Software
  • Honeywell x-map4p Integrated Audio Player
How to install and debug this product? Matters needing attention
Where can I download the manual and programming software?
Is it in stock or need to be ordered?
Can you provide technical service?
Where can I order this series?
Do you have product selection list and pre-sale service?