Beckhoff EL1814 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 10 µs, 3-wire connection

The EL1814 digital input terminal acquires the binary 24 V control

signals from the process level and transmits them, in an

electrically isolated form, to the higher-level automation unit.

The EtherCAT Terminal contains four channels whose signal state

is indicated by LEDs. The power contacts are connected through.

With the EL1814. the reference ground for all inputs is the 0 V power

contact.

Special features:

• input specification type 1/3

• low delay due to fast 10 µs input filter

• usable, for example, for inductive or capacitive sensors

• +24 V and 0 V sensor supply connections

• tool-free connection by direct plug-in technique for solid wire

conductors

• increased packing density with 16 connection points in the housing

of a 12 mm terminal block