IEC 61850 makes the application future-proof over entire system lifecycles.
IEC 61850 complements System 800xA’s capability of using open standards to integrate fieldbus devices within process automation.
For process electrification devices such as low voltage switchgear, variable speed drives and motor controllers,
System 800xA supports open fieldbus standards such as Profibus and Profinet. For process instrumentation,
System 800xA has extensive integration with HART, Profibus and Foundation Fieldbus.
Adopting IEC 61850 technology together with System 800xA also permits standardization of
various procedures in substation configuration, control logic, control libraries and operation procedures.
The object orientation of IEC 61850 enables standardized device models,
supported by System 800xA through its IEC 61850 compatibility.

This includes:
Motor starter and feeder modules (all sizes), which are equipped with measuring and
communication electronic device MControl
Motor starter and feeder modules (all sizes), which are equipped with intelligent device,
UMC and M10x, communicates to MLink.
Circuit breakers connected to the switchgear communication with the interface MConnect
Circuit breakers connected to the switchgear communication with the interface MLink
Excluded from supervision in MService are all modules not connected to the internal switchgear
communication such as MSpeed (Variable Speed drives in MNS iS) and conventional modules.
REF611 is a dedicated feeder protection relay designed for the protection, control,
measurement and supervision of utility substations and industrial power systems.
The feeder protection relay REF611 can be supplied either with directional or non-directional overcurrent and earth-fault protection.
Directional earth-fault protection is mainly used in isolated neutral or compensated networks,
whereas the non-directional earth fault protection is intended for directly or low-impedance earthed neutral networks.
REF611 is a member of ABB’s Relion® product family and part of its 611 protection and control series of relays.
Woodhead SST-IBS-CLX, Interbus Scanner Module, G4 Master.
AMAT AMAT-DNP-CPCI- 1 DEVICENET PRO PCB CARD SST WOODHEAD
WOODHEAD / MOLEX SST-DN3-PCU-2E PCI DEVICENET v 1.4.0
Woodhead SST PB3-PCU-E V1.7.1 PB3-PCI-e Communication Card
SST WOODHEAD CANADA 490-1655 Printed Circuit Board Card, REV: 1.1.0, 94V-0
SST-PFB-SLC Woodhead Profibus Scanner Module
SST Woodhead 5136-DNP-PCM-S T PCMCIA Devicenet Interface
Woodhead SST-CCS-PCU CC-Link Communications Card CCS-PCU1 U40
Woodhead 3095-002 Super-Safeway Outlet Box 3 Phase Cord Set 20AMP 120/208VAC
SST Woodhead PLX PCI9052 DeviceNet Pro 3U ComactPCI Interface PCB Card Working
SST Woodhead AMAT-DNP-CPCI- 2 DeviceNet 2 Channel Interface PCB Card Working
SST Woodhead SST-DNP-CPCI-3 U-1-NC DeviceNet PCB Card AMAT 0190-10156 Working
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
wechat/whatsapp:
+86-181-44100-983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved