Beckhoff ELM3504-0030 | EtherCAT Terminal, 4-channel analog input, measuring bridge

The ELM350x EtherCAT Terminals are designed for the evaluation of measuring

bridges in full-bridge, half-bridge and quarter bridge configuration.

The terminals feature internally switchable supplementary resistors. The feed

is integrated. Like all other parameters, the supply voltage is adjustable in the

CoE. Irrespective of the signal configuration, all ELM modules have the same

technological properties. The ELM350x modules for the evaluation of measuring

bridges offer a maximum sampling rate of 10.000 or 20.000 samples per second.

The 6-pin plug (push-in) can be removed for maintenance purposes without

releasing the individual wires.

The individual calibration certificate for each device, in accordance with ISO

17025 or DAkkS, depending on the device variant, can be downloaded

here. These calibration certificates are issued for Beckhoff by an accredited

service provider. Recalibration on request.

Extensive documentation is available from Beckhoff sales, support or

measurement@beckhoff.com.

This ELM3xxx series measurement terminal enables efficient implementation

of complex system-integrated data acquisition systems (DAQ) that place high

demands on measurement accuracy and time synchronization.