PCM12 Memory Module - RAM PCM 12 H&B Contronic

PCM12 Memory Module Manufacturers ABB, Hartmann & Braun Model(s)

ABB H&B Contronic, ABB H&B Contronic P

Estimated Shipping Size Dimensions: 5.0" x 1.0" x 10.0" (12.7 cm x 2.5 cm x 25.4 cm)

Weight: 0 lbs 7.1 oz (0.2kg ) PCM 12

ACCESSORIES

The same accessories as the other two circuit breakers in the

family can be mounted on Tmax T1. with great benefits in

terms of reduced stock and simple selection. Even the details

have not been overlooked, such as the new flange (ABB SACE

patent) which avoids securing with screws on the door and

compensates any defects in sheet  punching.

DOUBLE BREAKING

Tmax T2 uses the double breaking system with “forked” moving

contacts. It is thanks to the use of this advanced breaking tech

nique that such high current

limiting performances can be

obtained with such small over

all dimensions. Apart from

guaranteeing a high degree of

protection, these performances

mean better (and therefore

more economical) sizing of the

devices and cables installed on

the load side.

COMPLETE AND PERFECTLY INTEGRATED

In the range of molded case circuit breakers conforming with the

UL 489 and CSA C22.2 Standard, ABB SACE proposes an entire

range which covers continuous current ratings between 15 A and

2500 A and interrupting ratings, at 480 V AC, which can reach 100 kA.

The ranges available are as follows:– circuit breakers for power distribution (fitted with thermomag

netic or electronic trip units starting from 100 A)– circuit breakers with adjustable magnetic only trip units for

motor protection (MCP: Motor Control Protection)– molded case switches for use as isolators or switching devices

for lines, busbars or parts of a plant (MCS: Molded Case Switch)

With the introduction of the new Tmax UL series, a single-pole

circuit breaker with interrupting rating of 18 kA at 277 V AC is

available on the American market for the first time.