Emerson EP-8310 Empty Slot Filler Module

System Configurations

The Mini Converter can be used in a point-to-point configuration as described above,

or in a multidrop configuration with the host device configured as the master and one or more programmable controllers configured as slaves.

The multidrop configuration requires a straightthrough (1-to-1) cable from the Mini Converter’s RS-422 port to the first slave PLC’s SNP port.

Other slaves will require a daisy chain connection between slaves.

A maximum of eight devices can be connected in an RS-422 multidrop configuration.

All of the devices must have a common ground.

If ground isolation is required, you can use the Isolated Repeater/Converter (IC655CCM590) in place of the Mini Converter.

When using the Mini Converter with a modem connection,

it may be necessary to jumper RTS to CTS (consult the user’s manual for your modem).

Cable Diagrams (Point-To-Point) When connecting the Mini Converter to IBM PC and compatible computers with hardware handshaking,

the following cable connections should be used.

Tighter, More ReliableControl

The Ovation system is renowned for delivering precision control with outstanding performance. 

That precision begins with the Ovation Controller. With an Intel-based 

processor at its heart, the Ovation Controller provides full-redundancy to assure the reliability 

and security necessary for even the most demanding application. 

In addition to a comprehensive set of over 100 standard algorithms, 

Ovation also provides the ability to embed advanced control algorithms that leverage the ever expanding 

computing power of the Ovation Controller. 

This capability allows you to take control to a higher level by incorporating model predictive control and 

industry specific advanced applications to reduce process variability and optimize performance over the full range of plant operating conditions.