Beckhoff ED1897 | EtherCAT Terminal, 32-channel digital input

The EL1489 digital input terminal acquires the binary 24 V control

signals from the process level and transmits them, in an electrically

isolated form, to the higher-level automation unit.

The EtherCAT Terminal has 16 channels, whose signal states are

indicated by LEDs. The power contacts are connected through.

With the EL1489, the reference ground for all inputs is the 24 V

power contact.

The EL1862-0010 digital input terminal offers 16 channels in a very

compact design. A 20-pin contact strip enables the secure connection

of plug connectors using insulation displacement contact, as is usual

for ribbon cables and special round cables. This significantly simplifies

the wiring of many channels. The signal states of the channels are

indicated by LEDs. The power contacts are connected through.

The digital EL1852 EtherCAT Terminal combines eight digital inputs

and eight digital outputs on a single device. The signal state of

the channels is indicated by LEDs. The EL1852 offers a high packing

density with 16 channels. A 20-pin contact strip enables the secure

connection of plug connectors using insulation displacement contact,

as is usual for ribbon cables and special round cables.

This significantly simplifies the wiring of many channels.

Special features:

• compact design through the combination of inputs and outputs in

one terminal

• no bouncing due to mechanical switches thanks to 3 ms input filter

• short-circuit proof outputs protected against reverse polarity with

output current up to 0.5 A

• direct connection of connectors with insulation displacement

contacts

The ED1829 digital input terminal acquires the binary 24 V DC control signals

from the process level and transmits them, in electrically isolated form, to the

higher-level automation device. The EtherCAT Terminal contains 16 channels

whose signal state is indicated by LEDs. Due to the flexible switching logic,

each channel can be used for positive or ground switching. The switching

mode is determined automatically by the connected reference potential

without configuration. This creates two defined voltage ranges in which

the signal is reliably recognized as logical “1.”

The ED1809 digital input terminal acquires the binary 24 V DC control

signals from the process level and transmits them, in electrically isolated

form, to the higher-level automation device. The EtherCAT Terminal

contains 16 channels whose signal state is indicated by LEDs.

The power contacts are looped through. With the ED1809. the reference

ground for all inputs is the 0 V DC power contact.

The ED series EtherCAT Terminals have push-in connection technology

which makes wiring easy and tool-free.

The EL1808 digital input terminal acquires the binary 24 V control

signals from the process level and transmits them, in an electrically

isolated form, to the higher-level automation unit. The EtherCAT

Terminal contains eight channels, consisting of signal input and 24

V DC, whose signal state is indicated by LEDs.

The power contacts are connected through. With the EL1808. the

reference ground for all inputs is the 0 V power contact.

LTI DRIVES Compact Servo Controller CDF30.008.C2.4 8673548 DC 24-48V 1 pcs #BEV#

LUST LTI Drives Servo Drive CDA34.006.W3.0 / *SW: V3.70-04

Lust CDE34.005.W2.2 Lti Drives CDE34005W22

LUST LTI DRIVES CDA32.004.C1.4.H08.B0 Mat.-Nr.: 3084456 Software: V 160.10-01

1PC LUST LTi DRiVES CDB34.003.C2.4.PC1.H15 SERVO MOTOR DRIVER

LUST LTI DRIVES CDB32.008.W2.4.BR,PC1

LTI DRIVES Servo Controller CDF30.002.C0.7 08685963 DC 24V 1 pcs #BEV#

LUST LTI Drives CDF30.008.C2.4. M:8673548. rev:24.DC 24-48V 10A SERVO DRIVE

LTi DRIVES PM-E40.2DRA054P FW. 130.00-10 Wind Turbine Pitch Control Inverter

LUST LTi CDB32.004.C2.4.SH, LTi DRIVE REV : 24. 4A, DC24-48V SERVO DRIVE

LUST LTI Drives LST-074-2-30-320/T1. P, S4. 1R Servomotor 11722016

LUST LTI Drives LSH-097-2-30-560/T1. B, P, S4. G6.2M Servomotor 11713043