A-B 1783-SFP1GZX 1000BASE-ZX singlemode fiber

Overview 

The 1747-UIC allows you to connect devices that communicate using DH-485 protocol directly to a computer’s USB port, 

using either the 1747-UIC’s RS-232 or RS-485 port and user-provided programming cables. 

Three LED indicators on the 1747-UIC provide communication status.

Computer and Operating System Requirements The USB to DH-485 interface converter works with RSLinx 

version 2.41 or higher and Windows98/2000/XP, on computers equipped with USB ports.

The 1747-BSN features:

• backup of one Remote I/O or DH+ network per complementary BSN module pair.

• backup of one RS-232/DH-485 communications per complentary BSN module pair,

• allowing HMIs on channel 0 to automatically transfer to the primary processor.

• transfer of up to 2 K words of retentive data per BSN.

• repair of primary system fault during secondary backup system operation.

• remote programming capability of secondary processor on DH+ (SLC 5/04 only).

• minimal user program impact.

• backup system diagnostic information.

Ethernet Network

The TCP/IP Ethernet network is a local-area network designed for the high-speed exchange of information 

between computers and related devices. With its high bandwidth (10 Mbps to 100 Mbps), 

an Ethernet network allows many computers, controllers, and other devices to communicate over vast distances. An Ethernet network

The 1747-BSN module contains the full complement of RIO scanner features, plus

backup capability for support of redundant processor applications. The backup system

consists of one or more pairs of complementary modules, with one module residing in the

primary system and the other in the backup system. The primary system controls the

operation of remote I/O, while the backup system monitors communications via the

high-speed serial link (HSSL) and is available to take control in the event of a fault in the primary system.