A-B 1783-SFP1GTE 1000BASE-T copper

Ethernet Network

The TCP/IP Ethernet network is a local-area network designed for the high-speed exchange of information 

between computers and related devices. With its high bandwidth (10 Mbps to 100 Mbps), 

an Ethernet network allows many computers, controllers, and other devices to communicate over vast distances. An Ethernet network

The 1747-BSN module contains the full complement of RIO scanner features, plus

backup capability for support of redundant processor applications. The backup system

consists of one or more pairs of complementary modules, with one module residing in the

primary system and the other in the backup system. The primary system controls the

operation of remote I/O, while the backup system monitors communications via the

high-speed serial link (HSSL) and is available to take control in the event of a fault in the primary system.

The 1747-BSN features:

• backup of one Remote I/O or DH+ network per complementary BSN module pair.

• backup of one RS-232/DH-485 communications per complentary BSN module pair,

• allowing HMIs on channel 0 to automatically transfer to the primary processor.

• transfer of up to 2 K words of retentive data per BSN.

• repair of primary system fault during secondary backup system operation.

• remote programming capability of secondary processor on DH+ (SLC 5/04 only).

• minimal user program impact.

• backup system diagnostic information.

Universal Remote I/O (RIO) Network 

The strength and versatility of the Universal Remote I/O network comes from the breadth of products it supports. 

In addition to 1746 I/O, the Universal Remote I/O network supports many Allen-Bradley and third-party devices. 

Typical applications range from simple I/O links with controllers and I/O, to links with a wide variety of other types of devices. 

You connect devices through remote I/O adapter modules or built-in remote I/O adapters. 

Using the Universal RIO Network instead of direct-wiring a device over a long distance to a local I/O chassis reduces installation, 

tart-up, and maintenance costs by placing the I/O closer to the sensors and actuators. 

SLC 5/03, 5/04, and 5/05 processors support pass-thru which lets you configure RIO devices remotely from an Ethernet, 

DH+, or DH-485/DF1 network, as well as block transfer instructions for faster reading and writing of I/O data. 

1756-OV16E module Rockwell ControlLogix 16 digital output

1756-OV32E module Rockwell ControlLogix 32 digital output

1756-OW16I module Rockwell ControlLogix 16 digital output

1756-OX8I module Rockwell ControlLogix 8 digital output

1756-PA72 Module Rockwell ControlLogix AC Power Supply

1756-PA75 Module Rockwell ControlLogix AC Power Supply

1756-PA75R Module Rockwell ControlLogix AC Power Supply

1756-PAR2 Module Rockwell ControlLogix AC Power Supply

1756-PAXT Module Rockwell ControlLogix XT Power Supply

1756-PB72 Module Rockwell ControlLogix DC Power Supply

1756-PB75 Module Rockwell ControlLogix DC Power Supply

1756-PB75R Module Rockwell ControlLogix DC Power Supply

1756-PBR2 Module Rockwell ControlLogix Power Supply

1756-PBXT Module Rockwell ControlLogix XT Power Supply