Scope
These Application Notes are a guide to applying the G122-829A001 P-I Servoamplifier.
These Application Notes can be used to:
Determine the closed loop structure for your application.
Select the G122-829A001 for your application. Refer also to data sheet G122-829.
Use these Application Notes to determine your system configuration.
Draw your wiring diagram.
Install and commission your system.
Aspects, such as hydraulic design, actuator selection, feedback transducer selection,
performance estimation, etc. are not covered by these Application Notes.
The G122-202 Application Notes (part no C31015) cover some of these aspects.
Moog Application Engineers can provide more detailed assistance, if required.
The 914-EX provides two un-switched, low latency 10/100/1000 BASE-T(X) Ethernet links through the 914-HDE
optical port. Both ports are configured for 10/100/1000 BASE-T(X) auto-negotiation by default. Auto-negotiation
settings can be accessed via the 914-X Series Unified Diagnostic GUI when connected to the console 914-HDE
diagnostic port. A standard 8P8C (RJ45) modular jack provides the mechanical interface for the Ethernet port. The
port is auto MDI/MDIX capable and supports jumbo frames up to 9000 bytes. Note: sustained back-to-back jumbo
frames are supported up to 4000 bytes, larger frame sizes require increased interframe gaps. The 914-HDE
motherboard Ethernet port can sustain back-to-back jumbo frames of 9000 bytes if this feature is required for a
given system.
User name | Member Level | Quantity | Specification | Purchase Date |
---|
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved