CTI 2590-A 16-Point Isolated Discrete Output Module

Description

The 2590-A 16-point Isolated Discrete Output Module

provides sixteen discrete isolated outputs from the CTI

2500 Series®or Simatic® 505 I/O base. The module

uses solid- state output circuits to switch on or off ex

ternal devices such as pilot lamps, motor starters, or

solenoids. The 2590-A is designed to switch externally

supplied 20 to 132 VAC. The internal logic signals are

isolated from the external outputs to 1500 VDC.

Features

• CTI 2500 Series®  base format

• 2.0 Amps per output (no derating)

• Isolated 1500 VDC channel-to-channel

• Blown fuse reporting (per channel) to the PLC

• Blown fuse indicator

• Logs in as a 16Y or 16X/16Y (jumper selectable)

• Individual fuse for each output channel

• Single-wide module

Specifications

Outputs: 16

Logon: 16Y/16X or 16Y

Isolation:

1500 VDC channel-to-channel

1500 VDC channel-to-backplane

Blown fuse reporting per channel:

Reported to the PLC as an X input (jumper selectable)

Output voltage: 20 to 132 VAC

Output source current per circuit: 2.0 A max

"OFF" state leakage: 1mA max @ 25°C

Turn ON or OFF time: 1/2 AC cycle

Non-repetitive surge current: 80 Amps for 1 cycle

Total module output current: 32 Amps

Connector: Removable 40 Pin Connector

(ordered separately CTI Part # 2500-40F)

Wire gauge: 14 to 22 AWG

Backplane power: 2.5 watts max

Module size: Single wide

Fuses: 16. 3 Amp, 250V Type Littlefuse #2173.15

or Bussman GMA #GMA-3A or CTI Part Number

#80-65(Field Replaceable).

Shipping Weight:  1.5 lbs (0.68Kg)

Additional Product Information:

On CTI’s Website you will find links to the 2500 Series

Std Environmental Specifications and the UL Agency

Certificates of Compliance

Module Configuration

The 2590-A is capable of logging in as a 16Y or a 16X/16y.

Changing the addressing of the module is done by moving a

jumper located near the rear backplane connector as shown in

Figure 2 below. In Figure 2. the 2590-A module is inserted in slot

1 in the I/O base 0. Data appears as 16 "Y" locations starting at

"Y1". The 2590-A ships with a login of 16Y. In this configura

tion blown fuse reporting is disabled. By moving the jumper to

the REPORTS 16X INPUTS the module logs in as a 16X/16Y.

The X addresses are used to report the Blown Fuse Indication

and the 16Y addresses are used as any other normal output

would be used.