Beckhoff CX8210 | Embedded PC with Arm® Cortex®-A53 and EtherCAT slave

Compact PLC with Arm® Cortex®-A53 and Beckhoff RT Linux®

The CX8200 Embedded PC series is a further development of the existing

CX8100 series and combines higher computing power in a compact format

for a wide range of automation tasks. Equipped with a faster, modern Arm®

Cortex®-A53 processor with 64 bit architecture, users benefit from a

significantly higher clock frequency of 1.2 GHz and two cores for compact

controls. The multi-core CPUs allow PLC projects to be distributed to several

cores for significantly enhanced performance.

The CX8200 Embedded PC series forms the link between the CX7000 and

CX8100 series on one hand, and the CX9240 on the other, opening up whole

new application areas and possibilities thanks to the more modern CPU and

the same low power consumption. A particular highlight of the new series is

the significantly faster 1 Gbit Ethernet interface and the expansion of the

main memory to a larger 1 GB LPDDR4 RAM, which represents double the

main memory compared to the predecessor series. What’s more, the series

also offers a USB 3.0 interface that can be used for connecting wireless and

cellular components or additional USB storage media.

The main features of the CX8200 device series include:

• high-performance 1.2 GHz Arm® Cortex®-A53 CPUs with two cores

• 1 GB LPDDR4 RAM

• USB 3.0 interface for wireless and cellular communication

• built-in capacitive 1-second UPS

• TwinCAT NC PTP available

• platform level 20 in TwinCAT 3

The CX8190 is a controller with two Ethernet ports, one of which is switched to two RJ45

sockets. It supports protocols such as real-time Ethernet, ADS UDP/TCP or EAP (EtherCAT

Automation Protocol). K-bus or E-bus terminals can be attached as required; the CX8190

automatically recognizes the type of I/O system connected during the start-up phase. 

The control system is programmed with TwinCAT 3 via the fieldbus interface or the additional

Ethernet interface. TwinCAT 3 licenses must be ordered via the TwinCAT 3 price list.

Further TwinCAT 3 functions and protocols are available for the CX8190. for example OPC UA,

MQTT, Modbus TCP or Modbus RTU. All functions and protocols can be found in the TwinCAT

product finder if you set the filter under TwinCAT 3 platform level to P20.

The CX8091 is a control system with a switched Ethernet port. It supports either the BACnet

or OPC UA protocols. Simultaneous use is not recommended due to the small memory.

K-bus or E-bus terminals can be attached as required; the CX8091 automatically recognizes 

the type of I/O system connected during the start-up phase.

Beckhoff CP2912-0000 12.1" Touch Screen Display 2015 24VDC CP29120000

Beckhoff C6920-0050 C69200050 Celeron PCI Industrial PC

Beckhoff CX2030-0125 Basic CPU Module, TwinCAT 3. RJ45. DVI-I, 24VDC *

Beckhoff CX2030-0122 Basic CPU Module, TwinCAT 2. RJ45. DVI-I, 24VDC *

Mint CONDITION Beckhoff CP7802-1100-0010 touch panel **

CP2915-0000 Beckhoff Multi Touch Panel 15" Touchscreen / 24VDC HMI G150XGE L04

New No Box CX1020-0110 BeckHoff CPU Module, CX1020-N010. CX1020-N000. CX1100-004

CP7203-0021-0010 , Beckhoff CP7203-0021-0010

Beckhoff CX5140-0125/4GB PLC Controller CX5140-0125/ 4GB EL1809 EL2809 EL1904

Beckhoff CP3915-0000 Multitouch Panel

EL4712 BECKHOFF 2-channel analog output module brand

BECKHOFF CX9001-1101 + CX9000-N030 + CX9000-N000 -- CX9001

Beckhoff C6220 + Beckhoff FC3101 / 240 Volt