Beckhoff CX8190 | Embedded PC with Arm® Cortex®-A9 and 2-port Ethernet switch

The CX8190 is a controller with two Ethernet ports, one of which is switched to two RJ45

sockets. It supports protocols such as real-time Ethernet, ADS UDP/TCP or EAP (EtherCAT

Automation Protocol). K-bus or E-bus terminals can be attached as required; the CX8190

automatically recognizes the type of I/O system connected during the start-up phase. 

The control system is programmed with TwinCAT 3 via the fieldbus interface or the additional

Ethernet interface. TwinCAT 3 licenses must be ordered via the TwinCAT 3 price list.

Further TwinCAT 3 functions and protocols are available for the CX8190. for example OPC UA,

MQTT, Modbus TCP or Modbus RTU. All functions and protocols can be found in the TwinCAT

product finder if you set the filter under TwinCAT 3 platform level to P20.

The CX8091 is a control system with a switched Ethernet port. It supports either the BACnet

or OPC UA protocols. Simultaneous use is not recommended due to the small memory.

K-bus or E-bus terminals can be attached as required; the CX8091 automatically recognizes 

the type of I/O system connected during the start-up phase.

The control system is programmed with TwinCAT 2 via the fieldbus interface or the additional

Ethernet interface.

BACnet (Building Automation Control Network) is a standardized,manufacturer-independent

communication protocol for automation. Areas of application include HVAC, lighting control,

safety and fire alarm technology.

The CX8110 is a control system with EtherCAT slave interface. 

The DIP switch enables fixed or automatic addressing in the EtherCAT network.

E-bus or K-bus terminals can be attached as required; the CX8110 automatically

recognizes the type of I/O system connected during the start-up phase.

The control system is programmed with TwinCAT 3 via the Ethernet interface.

TwinCAT 3 licenses must be ordered via the TwinCAT 3 price list.

Further TwinCAT 3 functions and protocols are available for the CX8110. for example

OPC UA, MQTT, Modbus TCP or Modbus RTU. All functions and protocols can be

found in the TwinCAT product finder if you set the filter under TwinCAT 3 platform

level to P20.

The CX8180 has two serial interfaces: one with RS232 and one with RS485 physics.

Both serial interfaces are on the D-sub socket. They are not bound to a particular

protocol and can be used with the appropriate TwinCAT 3 functions for different serial

communication protocols. E-bus or K-bus terminals can be attached as required;

the CX8180 automatically recognizes the type of I/O system connected during the

start-up phase. The control system is programmed with TwinCAT 3 via the Ethernet

interface. TwinCAT 3 licenses must be ordered via the TwinCAT 3 price list.

Further TwinCAT 3 functions and protocols are available for the CX8180. for example 

OPC UA, MQTT, Modbus TCP or Modbus RTU. All functions and protocols can be found

in the TwinCAT product finder if you set the filter under TwinCAT 3 platform level to P20.

Beckhoff CP2912-0000 12.1" Touch Screen Display 2015 24VDC CP29120000

Beckhoff C6920-0050 C69200050 Celeron PCI Industrial PC

Beckhoff CX2030-0125 Basic CPU Module, TwinCAT 3. RJ45. DVI-I, 24VDC *

Beckhoff CX2030-0122 Basic CPU Module, TwinCAT 2. RJ45. DVI-I, 24VDC *

Mint CONDITION Beckhoff CP7802-1100-0010 touch panel **

CP2915-0000 Beckhoff Multi Touch Panel 15" Touchscreen / 24VDC HMI G150XGE L04

New No Box CX1020-0110 BeckHoff CPU Module, CX1020-N010. CX1020-N000. CX1100-004

CP7203-0021-0010 , Beckhoff CP7203-0021-0010

Beckhoff CX5140-0125/4GB PLC Controller CX5140-0125/ 4GB EL1809 EL2809 EL1904

Beckhoff CP3915-0000 Multitouch Panel

EL4712 BECKHOFF 2-channel analog output module brand

BECKHOFF CX9001-1101 + CX9000-N030 + CX9000-N000 -- CX9001

Beckhoff C6220 + Beckhoff FC3101 / 240 Volt