Power Engineering 
K-JIANG
Product
Article
NameDescriptionContent
English 简体中文
  • Eaton XN-322-2DMS-WM Technology modules
  • Eaton XN-322-8AIO-U2 Analog input/output module
  • Eaton XN-322-8AO-U2 Analog output module
  • Eaton XN-322-4AI-PTNI Analog input modules
  • Eaton XN-322-10AI-TEKT Analog input module
  • EATON XN300 Slice card modular I/O system
  • Beckhoff EL1814 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 10 µs, 3-wire connection
  • Beckhoff ED1829 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms
  • Honeywell X-NRI/EN Network Resource Interface
  • Honeywell x-smart System Management Software
  • Honeywell x-map4p Integrated Audio Player
  • Honeywell X-DA1500 High-efficiency Power Amplifier
  • Honeywell X-DA4125 HIGH EFFICIENCY POWER AMPLIFIER
  • Honeywell X-DA2250 High Efficiency Power Amplifier
  • Honeywell X-DA2250EN-B High Efficiency Power Amplifier
  • Honeywell X-DA1500EN High Efficiency Power Amplifier
  • Honeywell X-DA4125EN High Efficiency Power Amplifier with 24 VDC Backup Power Supply
  • Honeywell X-ND100 Digital Noise Detector
  • Honeywell X-K8 Extension Keypad
  • Honeywell X-K4 Extension Keypad
  • Honeywell X-NPMS Configurable Network Paging Station
  • Honeywell X-DCS3000 Digital Integrated System Manager
  • Honeywell X-DCS2000 Digital Integrated System Manager
  • Automotion LC-4 DC Brushless Motor Control
  • Honeywell X-DCS2000/EN Digital Integrated System Manager 50/60Hz 100-240V #4
  • Kongsberg M3 Sonar® HF with sound velocity sensor
  • Kongsberg M3 Sonar® HF
  • Kongsberg M3 SONAR® - 4000 M WITH SYNCHRONIZATION AND 1PPS
  • Beckhoff ED1839 | EtherCAT Terminal, 16-channel digital input, 24 V DC, adjustable, push-in
  • Beckhoff ED1809 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms, push-in
  • Beckhoff EL1809 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms
  • Beckhoff EL1808 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 3 ms, 2-wire connection
  • Euresys Coaxlink Octo PCIe 3.0 eight-connection CoaXPress frame grabber
  • Euresys Coaxlink Mono CXP-12 LH
  • Euresys Coaxlink Duo CXP-12
  • Beckhoff EL1804 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 3 ms, 3-wire connection
  • Beckhoff EL1512 | EtherCAT Terminal, 2-channel digital input, counter, 24 V DC, 1 kHz
  • Beckhoff EL1502 | EtherCAT Terminal, 2-channel digital input, counter, 24 V DC, 100 kHz
  • Beckhoff EL1262-0050 | EtherCAT Terminal, 2-channel digital input, 5 V DC, 1 µs, oversampling
  • Beckhoff EL1262-0010 | EtherCAT Terminal, 2-channel digital input + 2-channel digital output
  • Beckhoff EL1259 | EtherCAT Terminal, 8-channel digital input + 8-channel digital output, 24 V DC, 1 µs, 0.5 A, multi-timestamp
  • Beckhoff EL1258 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 1 µs, multi-timestamp
  • Beckhoff EL1252-0050 | EtherCAT Terminal, 2-channel digital input, 5 V DC, 1 µs, timestamp
  • Beckhoff EL1252-0010 | EtherCAT Terminal, 2-channel digital input, 24 V DC, 10 µs, timestamp
  • Beckhoff ELX1058 | EtherCAT Terminal, 8-channel digital input, NAMUR, Ex i
  • Beckhoff ELX1054 | EtherCAT Terminal, 4-channel digital input, NAMUR, Ex i
  • Beckhoff EK/EC1xxx, BK1xx0 | EtherCAT Couplers
  • Beckhoff BK1150 | EtherCAT Compact Bus Coupler
  • Beckhoff BK1120 | EtherCAT Bus Coupler for standard Bus Terminals
  • Beckhoff EK1960 | TwinSAFE Compact Controller
  • Beckhoff EK1914 | EtherCAT Coupler with integrated digital standard and safety I/Os
  • Beckhoff EK1828-0010 | EtherCAT Coupler with integrated digital outputs
  • Beckhoff EK1828 | EtherCAT Coupler with integrated digital inputs/outputs
  • Kollmorgen Stainless Steel AKMH Series
  • Kollmorgen AKME Series Servo Motors
  • Kollmorgen Essentials™ Servo Motors
  • Kollmorgen Essentials Motors Offer High Performance at an Exceptional Value
  • Kollmorgen Essentials Drive: Plug In. Power Up. Perform.
  • Kollmorgen The Benefits of the Essentials Servo System
  • Kollmorgen AKM2G represents the latest evolution of the industry-leading AKM motor family
  • Kollmorgen AKM® 2G Servo Motors
  • Kollmorgen New AKD2G 24A Drive
  • Kollmorgen Automation Suite™ Motion in Minutes
  • Kollmorgen 1G Motion System
  • Kollmorgen Essentials™ Motion Systems
  • Woodward Gas Stop/Ratio Valve
  • Beckhoff EK1818 | EtherCAT Coupler with integrated digital inputs/outputs
  • Beckhoff EK1814 | EtherCAT Coupler with integrated digital inputs/outputs
  • Beckhoff EK1541 | EtherCAT Coupler with ID switch, plastic optical fiber
  • Beckhoff EK1501-0100 | EtherCAT Coupler, media converter
  • Beckhoff EK1501-0010 | EtherCAT Coupler with ID switch, single-mode fiber optic
  • Beckhoff EK1501 | EtherCAT Coupler with ID switch, multi-mode fiber optic
  • Beckhoff EK1300 | EtherCAT P coupler
  • Beckhoff EK1122-0080 | 2-port EtherCAT junction, Fast Hot Connect
  • Beckhoff EK1122-0008 | 2-port EtherCAT junction with M8 connection
  • Beckhoff EK1121-0010 | 1-port EtherCAT junction, Extended Distance
  • Beckhoff EK1110-0043 | EtherCAT EJ coupler, CX and ELterminal connection
  • Beckhoff EK1110-0044 | EtherCAT EJ coupler, CX and EL terminal connection, EtherCAT junction
  • Beckhoff EK1110-0008 | EtherCAT extension with M8 connection
  • Beckhoff EC1110 | EtherCAT Terminal extension, RJ45, angled, push-in
  • Beckhoff CU8130-0240 | UPS modul, battery-backed
  • Beckhoff CU8130-0120 | UPS module, battery-backed
  • Beckhoff CU8110-0120 | UPS module, capacitive
  • Beckhoff CU8110-0060 | UPS module, capacitive
  • Beckhoff CX2072 | Embedded PC with Intel® Xeon® D-1567
  • Beckhoff CX2062 | Embedded PC with Intel® Xeon® D-1548
  • Beckhoff CX2042 | Embedded PC with Intel® Xeon® D-1527
  • Beckhoff CX2043 | Embedded PC with AMD Ryzen™ V1807B
  • Beckhoff CX2033 | Embedded PC with AMD Ryzen™ V1202B
  • Beckhoff CX20x3 | Embedded PC series
  • BAUMULLER b maXX 1000 Frequency converter
  • BAUMULLER b maXX 2400 Mini servo controller up to 2 kW
  • BAUMULLER b maXX 3300 Servo controller up to 5 kW
  • BAUMULLER b maXX 4600/4700 Peak and nominal load devices
  • BAUMULLER b maXX 4100 Regenerative power supply unit
  • BAUMULLER b maXX 4400 – The modular servo controller
  • BAUMULLER b maXX-drivePLC
  • BAUMULLER b maXX 4000 Modular servo controller
  • BAUMULLER b maXX 5600/5700 The application specific servo drive
  • BAUMULLER b maXX 5000 The safe, modular servo controller
  • Kollmorgen EtherCAT® Bus Coupler Features
  • LENZE i950 cabinet servo inverter
  • LENZE i750 cabinet servo inverter
  • LENZE i700 cabinet servo inverter
  • LENZE i650 motec frequency inverter
Home ⊙ Product ⊙ Beckhoff CX8050 | Embedded PC with Arm9™ and CANopen master
Current Location:

E-mail

Password
Register Forgot password?
Beckhoff CX8050 | Embedded PC with Arm9™ and CANopen master
❤ Add to collection

Beckhoff CX8050 | Embedded PC with Arm9™ and CANopen master

+86-18144100983
kongjiangauto@163.com
wind, petroleum, chemical, natural gas, Marine, mining, aviation, electronics, steel, nuclear power, electric power, coking, air separation and so on
PLC, DCS, servo, analog, Ethernet, digital, redundant module, tension system, excitation, generator management, human-machine interface, detection card, sensor, AC drive, etc
U.S.＄13880.00
U.S.＄9881.00
Weight：3.900KG
Quantity：
(Inventory: 2)
Buy now
Add to cart
Product parameters
  • Tell:+86-18144100983
  • email:kongjiangauto@163.com
  • Application:wind/ petroleum/ chemical/ natural gas/ Marine/ mining/ aviation/ electronics/ steel/ nuclear power/ electric power/ coking/ air separation and so on
  • Series:PLC/ DCS/ servo/ analog/ Ethernet/ digital/ redundant module/ tension system/ excitation/ generator management/ human-machine interface/ detection card/ sensor/ AC drive/ etc
Feature

The CX8031 is a control system with PROFIBUS slave interface.

The PROFIBUS address is set via two rotary selection switches. 

The CX8031 offers automatic baud rate detection. K-bus or E-bus

terminals can be attached as required; the CX8031 automatically

recognizes the type of I/O system connected during the start-up phase. 

The control system is programmed with TwinCAT via the additional Ethernet

interface.

The CX7293 Embedded PC has an Arm® Cortex®-A9 single-core

processor with 720 MHz. In the basic configuration, the CX7293 has a slot for

a microSD card and an Ethernet interface. As a special feature, the CX7000

series has eight integratedmulti-functional inputs as well as four integrated

multi-functional outputs.

E-bus or K-bus terminals can be attached as required; the CX7293 automatically 

recognizes the type of I/O system connected during the start-up phase.

The control system is programmed with TwinCAT 3 via the Ethernet interface.

The CX7293 has a PROFINET RT device interface.

The CX7291 Embedded PC has an Arm® Cortex®-A9 single-core processor

with 720 MHz. In the basic configuration, the CX7291 has a slot for a microSD

card and an Ethernet interface. As a special feature, the CX7000 series has

eight integrated multi-functional inputs as well as four integrated multi-functional

outputs.

E-bus or K-bus terminals can be attached as required; the CX7291 automatically

recognizes the type of I/O system connected during the start-up phase.

The control system is programmed with TwinCAT 3 via the Ethernet interface.

BACnet (Building Automation Control Network) is a standardized, manufacturer

-independent communication protocol for building automation.

Areas of application include HVAC, lighting control, safety and fire alarm technology.

The CX7051 Embedded PC has an Arm® Cortex®-M7 single-core processor

with 480 MHz. In the basic configuration, the CX7051 has a slot for a microSD

card and an Ethernet interface. As a special feature, the CX7000 series has

eight integrated multi-functional inputs as well as four integrated multi-functional

outputs. The CX7051 has a CANopen responder (slave) interface.

E-bus or K-bus terminals can be attached as required; the CX7051 automatically

recognizes the type of I/O system connected during the start-up phase. 

The control system is programmed with TwinCAT 3 via the Ethernet interface.

The EK1101-0080 EtherCAT Coupler is the link between the EtherCAT protocol

at fieldbus level and the EtherCAT Terminals. The coupler converts the passing

telegrams from Ethernet 100BASE-TX to E-bus signal representation.

A station consists of a coupler and any number of EtherCAT Terminals that are

automatically detected and individually displayed in the process image.

Beckhoff Cx5130-0120/4GB Embedded-PC with Intel-Atom-Processor Cx5130-0120

Beckhoff AX5201-0000-0202 server Driver#

CU8815-BECKHOFF-CU8815

Beckhoff CX2030 Industrial PC 4GB | HW: 4.2 | CX2030-0155

Beckhoff CP6933-0001-0000

BECKHOFF module EL5122

Beckhoff CP7711-0001-0030 Industrial Computer Detection

BECKHOFF AX5106-0000-0200 Servo Driver

FOR Beckhoff EK9500 EtherNet/IP-Buskoppler

Beckhoff CP3918-1012-0000 Multi-Touch Control Panel 24VDC

Beckhoff CP6207-0001-0020 1.6 GHz

Beckhoff C6650-0020 industrial PC

BECKHOFF C6920-0000 MODULE

  • EATON XN300 Slice card modular I/O system
  • Beckhoff EL1814 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 10 µs, 3-wire connection
  • Beckhoff ED1829 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms
  • Honeywell X-NRI/EN Network Resource Interface
  • Honeywell x-smart System Management Software
  • Honeywell x-map4p Integrated Audio Player
  • Honeywell X-DA1500 High-efficiency Power Amplifier
  • Honeywell X-DA4125 HIGH EFFICIENCY POWER AMPLIFIER
  • Honeywell X-DA2250 High Efficiency Power Amplifier
  • Honeywell X-DA2250EN-B High Efficiency Power Amplifier
  • Honeywell X-DA1500EN High Efficiency Power Amplifier
  • Honeywell X-DA4125EN High Efficiency Power Amplifier with 24 VDC Backup Power Supply
  • Honeywell X-ND100 Digital Noise Detector
  • Honeywell X-K8 Extension Keypad
  • Honeywell X-K4 Extension Keypad
  • Honeywell X-NPMS Configurable Network Paging Station
  • Honeywell X-DCS3000 Digital Integrated System Manager
  • Honeywell X-DCS2000 Digital Integrated System Manager
  • Automotion LC-4 DC Brushless Motor Control
  • Honeywell X-DCS2000/EN Digital Integrated System Manager 50/60Hz 100-240V #4
  • Kongsberg M3 Sonar® HF with sound velocity sensor
  • Kongsberg M3 Sonar® HF
  • Kongsberg M3 SONAR® - 4000 M WITH SYNCHRONIZATION AND 1PPS
  • Beckhoff ED1839 | EtherCAT Terminal, 16-channel digital input, 24 V DC, adjustable, push-in
  • Beckhoff ED1809 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms, push-in
  • Beckhoff EL1809 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms
  • Beckhoff EL1808 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 3 ms, 2-wire connection
  • Euresys Coaxlink Octo PCIe 3.0 eight-connection CoaXPress frame grabber
  • Euresys Coaxlink Mono CXP-12 LH
  • Euresys Coaxlink Duo CXP-12
  • Beckhoff EL1804 | EtherCAT Terminal, 4-channel digital input, 24 V DC, 3 ms, 3-wire connection
  • Beckhoff EL1512 | EtherCAT Terminal, 2-channel digital input, counter, 24 V DC, 1 kHz
  • Beckhoff EL1502 | EtherCAT Terminal, 2-channel digital input, counter, 24 V DC, 100 kHz
  • Beckhoff EL1262-0050 | EtherCAT Terminal, 2-channel digital input, 5 V DC, 1 µs, oversampling
  • Beckhoff EL1262-0010 | EtherCAT Terminal, 2-channel digital input + 2-channel digital output
  • Beckhoff EL1259 | EtherCAT Terminal, 8-channel digital input + 8-channel digital output, 24 V DC, 1 µs, 0.5 A, multi-timestamp
  • Beckhoff EL1258 | EtherCAT Terminal, 8-channel digital input, 24 V DC, 1 µs, multi-timestamp
  • Beckhoff EL1252-0050 | EtherCAT Terminal, 2-channel digital input, 5 V DC, 1 µs, timestamp
  • Beckhoff EL1252-0010 | EtherCAT Terminal, 2-channel digital input, 24 V DC, 10 µs, timestamp
  • Beckhoff ELX1058 | EtherCAT Terminal, 8-channel digital input, NAMUR, Ex i
  • Beckhoff ELX1054 | EtherCAT Terminal, 4-channel digital input, NAMUR, Ex i
  • Beckhoff EK/EC1xxx, BK1xx0 | EtherCAT Couplers
  • Beckhoff BK1150 | EtherCAT Compact Bus Coupler
  • Beckhoff BK1120 | EtherCAT Bus Coupler for standard Bus Terminals
  • Beckhoff EK1960 | TwinSAFE Compact Controller
  • Beckhoff EK1914 | EtherCAT Coupler with integrated digital standard and safety I/Os
  • Beckhoff EK1828-0010 | EtherCAT Coupler with integrated digital outputs
  • Beckhoff EK1828 | EtherCAT Coupler with integrated digital inputs/outputs
  • Kollmorgen Stainless Steel AKMH Series
  • Kollmorgen AKME Series Servo Motors
  • Kollmorgen Essentials™ Servo Motors
  • Kollmorgen Essentials Motors Offer High Performance at an Exceptional Value
  • Kollmorgen Essentials Drive: Plug In. Power Up. Perform.
  • Kollmorgen The Benefits of the Essentials Servo System
  • Kollmorgen AKM2G represents the latest evolution of the industry-leading AKM motor family
  • Kollmorgen AKM® 2G Servo Motors
  • Kollmorgen New AKD2G 24A Drive
  • Kollmorgen Automation Suite™ Motion in Minutes
  • Kollmorgen 1G Motion System
  • Kollmorgen Essentials™ Motion Systems
  • Woodward Gas Stop/Ratio Valve
  • Beckhoff EK1818 | EtherCAT Coupler with integrated digital inputs/outputs
  • Beckhoff EK1814 | EtherCAT Coupler with integrated digital inputs/outputs
  • Beckhoff EK1541 | EtherCAT Coupler with ID switch, plastic optical fiber
  • Beckhoff EK1501-0100 | EtherCAT Coupler, media converter
  • Beckhoff EK1501-0010 | EtherCAT Coupler with ID switch, single-mode fiber optic
  • Beckhoff EK1501 | EtherCAT Coupler with ID switch, multi-mode fiber optic
  • Beckhoff EK1300 | EtherCAT P coupler
  • Beckhoff EK1122-0080 | 2-port EtherCAT junction, Fast Hot Connect
  • Beckhoff EK1122-0008 | 2-port EtherCAT junction with M8 connection
  • Beckhoff EK1121-0010 | 1-port EtherCAT junction, Extended Distance
  • Beckhoff EK1110-0043 | EtherCAT EJ coupler, CX and ELterminal connection
  • Beckhoff EK1110-0044 | EtherCAT EJ coupler, CX and EL terminal connection, EtherCAT junction
  • Beckhoff EK1110-0008 | EtherCAT extension with M8 connection
  • Beckhoff EC1110 | EtherCAT Terminal extension, RJ45, angled, push-in
  • Beckhoff CU8130-0240 | UPS modul, battery-backed
  • Beckhoff CU8130-0120 | UPS module, battery-backed
  • Beckhoff CU8110-0120 | UPS module, capacitive
  • Beckhoff CU8110-0060 | UPS module, capacitive
  • Beckhoff CX2072 | Embedded PC with Intel® Xeon® D-1567
  • Beckhoff CX2062 | Embedded PC with Intel® Xeon® D-1548
  • Beckhoff CX2042 | Embedded PC with Intel® Xeon® D-1527
  • Beckhoff CX2043 | Embedded PC with AMD Ryzen™ V1807B
  • Beckhoff CX2033 | Embedded PC with AMD Ryzen™ V1202B
  • Beckhoff CX20x3 | Embedded PC series
  • BAUMULLER b maXX 1000 Frequency converter
  • BAUMULLER b maXX 2400 Mini servo controller up to 2 kW
  • BAUMULLER b maXX 3300 Servo controller up to 5 kW
  • BAUMULLER b maXX 4600/4700 Peak and nominal load devices
  • BAUMULLER b maXX 4100 Regenerative power supply unit
  • BAUMULLER b maXX 4400 – The modular servo controller
  • BAUMULLER b maXX-drivePLC
  • BAUMULLER b maXX 4000 Modular servo controller
  • BAUMULLER b maXX 5600/5700 The application specific servo drive
  • BAUMULLER b maXX 5000 The safe, modular servo controller
  • Kollmorgen EtherCAT® Bus Coupler Features
  • LENZE i950 cabinet servo inverter
  • LENZE i750 cabinet servo inverter
  • LENZE i700 cabinet servo inverter
  • LENZE i650 motec frequency inverter
  • LENZE i550 motec frequency inverter
  • LENZE i550 protec frequency inverter
  • LENZE x500 IoT gateway
  • Beckhoff CX5630 | Embedded PC with AMD Ryzen™ R1505G
  • Beckhoff CX5620 | Embedded PC with AMD Ryzen™ R1102G
  • Beckhoff CX56x0 | Embedded PC series
  • Beckhoff CX5340 | Embedded PC withIntel Atom® x6425RE
  • Beckhoff CX53x0 | Embedded PC series
  • Beckhoff CX2500-M510 | Fieldbus master module CANopen for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-M310 | Fieldbus master module PROFIBUS for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-B510 | Fieldbus slave module CANopen for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-B310 | Fieldbus slave module PROFIBUS for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX52x0 | Embedded PC series
  • Beckhoff CX5140 | Embedded PC with Intel Atom® E3845
  • Beckhoff CX9240 | Embedded PC with Arm® Cortex®-A53
  • Beckhoff CX9020 | Embedded PC with Arm® Cortex®-A8
  • Beckhoff CX8290 | Embedded PC with Arm® Cortex®-A53 and 2-port Ethernet switch
  • Beckhoff CX8280 | Embedded PC with Arm® Cortex®-A53 and RS232/RS485
  • Beckhoff CX8210 | Embedded PC with Arm® Cortex®-A53 and EtherCAT slave
  • Beckhoff CX82xx | Embedded PC series, compact PLC
  • Beckhoff CX8191 | Embedded PC with Arm® Cortex®-A9 and BACnet/IP
  • Beckhoff CX7000 | Embedded PC with Arm® Cortex®-M7 and integrated I/Os
  • LENZE I/O system 1000
  • Schneider SAITEL Remote Terminal Unit & Controller
  • Schneider Saitel DP platform M586A0000y / SM_DO16R
  • LENZE C250-S Safety Controller
  • LENZE c520/c550/c750 controllers Powerful – everything under control
  • LENZE C550 Controller
How to install and debug this product? Matters needing attention
Where can I download the manual and programming software?
Is it in stock or need to be ordered?
Can you provide technical service?
Where can I order this series?
Do you have product selection list and pre-sale service?