Beckhoff CX2100-0914 | Power supply unit for external battery pack for CX20x3 and CX2042

The electrically isolated CX2100-0914 power supply unit extends the existing

power supply module portfolio for Embedded PCs by a fanless UPS-OCT-capable

version offering a maximum power output of 100 W. It is intended for supplying

power to the components of a CX20xx system (CPU modules, system and

extension modules) and is suitable for all existing basic CPU modules from the

CX20xx series, as long as the maximum power output is not exceeded.

The CX2100-0914 power supply unit is passively cooled and thus fanless and

maintenance-free. An FSTN LC display with 2 x 16 characters and a selector

switch as well as an enter key allow the querying of internal status values as

well as self-created display parameters or menus with and without input options.

The integrated display is controlled via TwinCAT.

EtherCAT or Bus Terminals can be connected on the right-hand side – the

respective bus system is detected automatically and operated by the CPU.

Power is supplied to the E-bus or K-bus electronics in the I/O terminals by an

integrated, but internally separate power supply unit with 2 A at 5 V DC.

Continuing support for TwinCAT 2 by the CX2033 and CX2043 guarantees

investment protection for projects and systems that were or will be created

with this 32-bit generation.

The devices from the CX20x3 series are characterized by outstanding real-time

characteristics under the highest computing loads.

This enables deterministic processing with short cycle times on the individual

cores of the CPUs.

The basic equipment of the hardware includes two independent Gbit-Ethernet

interfaces, four USB 3.2 Gen. 2 ports, one DVI-D interface, and a multi-option

interface that can be equipped ex factory with a flexible choice of further

interfaces (e.g., serial port, fieldbus, or second video connection).

The internal RAM size is 8 GB; up to 16 GB are also optionally possible. 

The controller boots from the CFast card and has an internal 128 kB NOVRAM

for use as a persistent data memory.

The CX2033 is fanless and has no rotating components. Cooling takes place

by passive thermal convection.

The CX2500-Bxxx fieldbus slave modules are left-sided attachments

for the Embedded PC series CX20xx, CX52x0. CX53x0 and CX56x0.

The use of systems with fieldbus slave modules enables the use of

a CX system as a subordinate local controller for the construction of

complex or modular systems. External process data are received from

the master and processed, or data from its own process peripherals

are returned to the master controller directly or processed.

Beckhoff CPU module CX5140-0155/4 GB CPU module by Beckhoff for industry

Beckhoff CX1030-0122/000002818 CPU module

Beckhoff AMP8043-H042-0000

Beckhoff ELM3504-0000 Measuring Bridge Full/Half/Quarter Bridge 24 Bit

Beckhoff CX5010-0121 CPU Module CX5010 + CX1900-0027 4GB

Beckhoff Servo Motor AM8042-0F10-0000 AM80420F100000

Terasaki EMW-1101A K/834/5-001B Cpu & Ram Rom Module

Modulo Cpu E Ram Rom Terasaki EMW-1101A K/834/5-001B

ABB EL3040 GAS ANALYZER PANEL

Pannello Analizzatore Di Gas ABB EL3040

ABB EL3040 GAS ANALYSIS PANEL

ABB KENT-TAYLOR ZIRCONIA ZMT OXYGEN ANALYZER PANEL ZMT/231/000000 /4112

ABB Kent-Taylor Zirconia ZMT Oxygen Analyzer Panel ZMT/231/000000/4112