Beckhoff CU8110-0060 | UPS module, capacitive

CU8110-0060 is a capacitive, uninterruptible power supply (UPS) providing

up to 0.3 Wh with a maximum output power of 55 W.

If the external 24 V DC input voltage is lost, the UPS takes over the supply

of the devices connected to it thanks to its regulated and buffered 24 V DC

output voltage.

The CU81xx UPS series is suitable for all Beckhoff components, particularly

Industrial PCs, Embedded PCs, Panels, and Panel PCs.

The main features of this UPS are:

• maintenance-free thanks to capacitive energy storage devices based on

double-layer film capacitors (EDLCs)

• UPS can be mounted on a DIN rail or at the rear panel of the control cabinet

• connection option for a main device (e.g. Industrial PC) and a secondary device

(e.g. Control Panel)

• short-circuit protected outputs

• automatic switch-off based on time or residual energy control to protect the

energy module

• automatic restart when power is restored (autonomous start)

• protocol-based communication with Industrial PC, optionally via OCT (One Cable

Technology) or USB

• digital signals for communication with non-protocol-capable end devices

• parameterization and diagnostics via Beckhoff UPS configuration software on

various operating systems

• TwinCAT PLC function blocks for querying the UPS operation

The CX2042 has an Intel® Xeon® CPU with a clock rate of 2.2 GHz

(four cores). A fan with ball bearings and speed monitoring is integrated

into the basic CPU module. In addition to the CPU, the basic module

also contains the main memory with a size of 8 GB RAM, optionally

available with up to 64 GB. The controller boots from a CFast flash

memory card where both the operating system as well as user programs

and data are stored.

The CPU has an internal 128 kB NOVRAM, which acts as a persistent

data memory if no UPS is used.

The use of TwinCAT 3 allows automation tasks to be distributed across

the various cores of the Intel® Xeon® CPU.

All system modules from the CX2000 series for left- or right-sided

functional extensions can be connected. Internally the modules are

connected via PCI Express® and can be plugged to the CPU in the field.

The power supply for the CPU module comes from a CX2100-0014 power

supply module. Up to two mass storage modules (either CX2550-0010

CFast modules or CX2550-0020 2½-inch SSD modules) can be plugged

in between the power supply unit and the CPU, allowing the use of up

to three mass storage devices in total.

Beckhoff CPU module CX5140-0155/4 GB CPU module by Beckhoff for industry

Beckhoff CX1030-0122/000002818 CPU module

Beckhoff AMP8043-H042-0000

ABB EL3040 GAS ANALYZER PANEL

Pannello Analizzatore Di Gas ABB EL3040

ABB EL3040 GAS ANALYSIS PANEL

ABB KENT-TAYLOR ZIRCONIA ZMT OXYGEN ANALYZER PANEL ZMT/231/000000 /4112

ABB Kent-Taylor Zirconia ZMT Oxygen Analyzer Panel ZMT/231/000000/4112

Beckhoff ELM3504-0000 Measuring Bridge Full/Half/Quarter Bridge 24 Bit

Beckhoff CX5010-0121 CPU Module CX5010 + CX1900-0027 4GB

Beckhoff Servo Motor AM8042-0F10-0000 AM80420F100000

Terasaki EMW-1101A K/834/5-001B Cpu & Ram Rom Module

Modulo Cpu E Ram Rom Terasaki EMW-1101A K/834/5-001B