A-B 1784-SD1 Memory Cards

Overview 

The 1747-UIC allows you to connect devices that communicate using DH-485 protocol directly to a computer’s USB port, 

using either the 1747-UIC’s RS-232 or RS-485 port and user-provided programming cables. 

Three LED indicators on the 1747-UIC provide communication status.

Computer and Operating System Requirements The USB to DH-485 interface converter works with RSLinx 

version 2.41 or higher and Windows98/2000/XP, on computers equipped with USB ports.

Universal Remote I/O (RIO) Network 

The strength and versatility of the Universal Remote I/O network comes from the breadth of products it supports. 

In addition to 1746 I/O, the Universal Remote I/O network supports many Allen-Bradley and third-party devices. 

Typical applications range from simple I/O links with controllers and I/O, to links with a wide variety of other types of devices. 

You connect devices through remote I/O adapter modules or built-in remote I/O adapters. 

Using the Universal RIO Network instead of direct-wiring a device over a long distance to a local I/O chassis reduces installation, 

tart-up, and maintenance costs by placing the I/O closer to the sensors and actuators. 

SLC 5/03, 5/04, and 5/05 processors support pass-thru which lets you configure RIO devices remotely from an Ethernet, 

DH+, or DH-485/DF1 network, as well as block transfer instructions for faster reading and writing of I/O data. 

Selecting a ControlLogix System

The ControlLogix system architecture provides sequential, process, and

motion control together with communications and state-of-the-art I/O in a

small, cost-competitive package. The system is modular, so you can design,

build, and modify it efficiently - with significant savings in training and engineering.

A ControlLogix system can be anything from a simple chassis to a highly-distributed

system consisting of multiple chassis and networks working together.

A simple ControlLogix system consists of a stand-alone controller and I/O modules in a single chassis.

Or you can use the ControlLogix system as a gateway. Include the

communication modules you need for connectivity to other networks. For

this use, a controller is not required. The ControlLogix Gateway integrates

into existing PLC-based systems so that users with existing networks can

send or receive messages to or from other networks.

You may also need the following related products：

1756-OB32 module Rockwell ControlLogix 32 digital output

1756-OB8 module Rockwell ControlLogix 8 digital output

1756-OB8EI module Rockwell ControlLogix 8 digital output

1756-OB8I module Rockwell ControlLogix 8 digital output

1756-OC8 module Rockwell ControlLogix 8 digital output

1756-OF4 module Rockwell ControlLogix 4 analog

1756-OF6CI module Rockwell ControlLogix 6 analog

1756-OF6VI module Rockwell ControlLogix 6 analog

1756-OF8 module Rockwell ControlLogix 8 analog

1756-OF8H module Rockwell ControlLogix 8 analog

1756-OG16 module Rockwell ControlLogix 16 digital output

1756-OH8I module Rockwell ControlLogix 8 digital output

1756-ON8 module Rockwell ControlLogix 8 digital output