Processor Operation in Case of Blown Fuse - Processor Faults
The Processor Fault position for JP1 is shown on the following page.
For this JP1 configuration, the processor generates a nonrecoverable error for all SLC 500 processors.
For a nonrecoverable error, note the following:
• Processor operation halts and the processor fault light flashes.
• All outputs are reset to OFF.
• The processor major fault bit S:1/13 is set.
• Monitor processor status file word S:6 for error code xx58 for SLC 500 and
5/01 processors, and error code xx60 for SLC 5/02 and later processors.
IMPORTANT
The 1746-OB6EI and 1746-OB16E modules perform auto-reset under
overload conditions. When an output channel overload occurs, that channel
will limit current within milliseconds after its thermal cut-out temperature
has been reached. While in current limit, the output channel can cool below
the thermal cut-out temperature allowing the module to auto-reset and
resume control of the output channel as directed by the processor until the
thermal cut-out temperature is again reached.
Removing power from an overloaded output channel would also allow the
output channel to cool below the thermal cut-out temperature, allowing
auto-reset to occur when power is restored. The output channel would
operate as directed by the processor until the thermal cut-out temperature is
again reached.
To avoid auto-reset of an output channel under overload conditions, an
external mechanical fuse can be used to open the circuit when overloaded.
Heat Dissipation
The following tables contain values for the heat dissipated by each I/O module.
Use them to calculate the total amount of heat dissipated by your SLC 500 control system.
For details on how to calculate total heat dissipation, refer to the SLC 500 Modular Hardware Style User Manual, publication 1747-UM011.
Please note the following definitions:
• Watts per point - the heat dissipation that can occur in each field wiring point when energized at nominal voltage.
• Minimum Watts - the amount of heat dissipation that can occur when there is no field power present.
Install the Chassis Interconnect Cable (optional)
To connect up to three chassis together (for a maximum of 30 I/O slots), install the chassis interconnect cable before attaching your power supply.
Vis M4 ou M5 (n° 10 ou n° 12)
• des vis cruciformes et des rondelles éventail (ou vis SEM, vis cruciforme avec
rondelle éventail imperdable) pour les pattes de fixation du châssis ;
• un tournevis cruciforme ;
• une perceuse.
Documentation
La documentation sur :
• votre processeur ou adaptateur d’E/S ;
• votre bloc d’alimentation ;
• vos modules de communication et/ou modules d’E/S.
More Model Recommendations:
1756-OB16IS module Rockwell ControlLogix 16 digital output
1756-OB32 module Rockwell ControlLogix 32 digital output
1756-OB8 module Rockwell ControlLogix 8 digital output
1756-OB8EI module Rockwell ControlLogix 8 digital output
1756-OB8I module Rockwell ControlLogix 8 digital output
1756-OC8 module Rockwell ControlLogix 8 digital output
1756-PA75 Module Rockwell ControlLogix AC Power Supply
1756-PA75R Module Rockwell ControlLogix AC Power Supply
1756-OF4 module Rockwell ControlLogix 4 analog
1756-OF6CI module Rockwell ControlLogix 6 analog
1756-OF6VI module Rockwell ControlLogix 6 analog
1756-OF8 module Rockwell ControlLogix 8 analog
1756-OF8H module Rockwell ControlLogix 8 analog
1756-OG16 module Rockwell ControlLogix 16 digital output
1756-OH8I module Rockwell ControlLogix 8 digital output
1756-ON8 module Rockwell ControlLogix 8 digital output
1756-OV16E module Rockwell ControlLogix 16 digital output
1756-OV32E module Rockwell ControlLogix 32 digital output
1756-OW16I module Rockwell ControlLogix 16 digital output
1756-OX8I module Rockwell ControlLogix 8 digital output
1756-PAR2 Module Rockwell ControlLogix AC Power Supply
1756-PAXT Module Rockwell ControlLogix XT Power Supply
1756-PB72 Module Rockwell ControlLogix DC Power Supply
1756-PB75 Module Rockwell ControlLogix DC Power Supply
1756-PB75R Module Rockwell ControlLogix DC Power Supply
1756-PBR2 Module Rockwell ControlLogix Power Supply
1756-PBXT Module Rockwell ControlLogix XT Power Supply
1756-PC75 Module Rockwell ControlLogix DC Power Supply
1756-PH75 Module Rockwell ControlLogix DC Power Supply
1756-PSCA2 Module Rockwell ControlLogix Adapter
1756-PA72 Module Rockwell ControlLogix AC Power Supply
User name | Member Level | Quantity | Specification | Purchase Date |
---|
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved