Product features
// 1 x EtherCAT / EtherNet/IP / PROFINET
// Plug connection for
KeControl C5 control modules
Brief description
The Ethernet-based fieldbus card FE 560 can be connected on
the left of the KeControl C5 controllers using the Card Edge connector.
This allows the exchange and processing of process data between
the higher-level control and the KeControl C5 control.
All relevant protocols such as EtherCAT, EtherNet/IP and PROFINET are supported.
Technical specifications
Interfaces
KeControl C5 control module 1 x Card Edge connector
EtherCAT slave / EtherNet/IP adapter /
PROFINET IO-Device 2 x RJ45
Dimensions
Height 106 mm
Width 26.5 mm (when installed)
Depth 82.5 mm (snap-on height 77.5 mm)
Weight 95 g
Environmental conditions
Operating temperature 0 °C to +55 °C
Storage temperature-40 °C to +70 °C
Relative humidity 10 % to 95 % (non-condensing)
Vibration/shock resistance According to EN 61131-2
General data
Overvoltage category II
Protection class III according to EN 61010-2-201
Certification
CE 2014/30/EU and 2011/65/EU
UL UL 61010-1 and UL 61010-2-201
UKCA Conformity with relevant statutory requirements
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved