Product features
// 2 x EtherCAT master interfaces
// Plug connection for
KeControl C5 control modules
Brief description
The FE 57x fieldbus master cards can be connected on the left of the
KeControl C5 controllers using the Card Edge connector.
They make it possible to create additional EtherCAT master interfaces
on the controller and thus an expansive set-up of plants and machines
through the use of numerous fieldbus components.
The EtherCAT interfaces can be supplied either with M8 or
with RJ45 connectors. Depending on the requirements,
this provides suitability for individual industrial applications.
The built-in switch supports a star topology of the EtherCAT
slaves without the need for additional hardware.
Technical specifications
Dimensions
Height 106 mm
Width 26.5 mm (when installed)
Depth 82.5 mm (snap-on height 77.5 mm)
Weight 95 g
Environmental conditions
Operating temperature 0 °C to +55 °C
Storage temperature-40 °C to +70 °C
Relative humidity 10 % to 95 % (non-condensing)
Vibration/shock resistance According to EN 61131-2
General data
Overvoltage category II
Protection class III according to EN 61010-2-201
Interfaces
FE 571 FE 573
KeControl C5 control module 1 x Card Edge connector
EtherCAT master 2 x RJ45 2 x M8
Certification
CE 2014/30/EU and 2011/65/EU
UL UL 61010-1 and UL 61010-2-201
UKCA Conformity with relevant statutory requirements
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved