ABB 07KT98 GJR5253100R4278 Advant Controller Module

Product General Information

Product Code: 3BHT300008R1

ABB Type Designation: AO610

Short Description: AO610 Analog Output 16ch, 12bit

Long Description: AO610 Analog Output 16Ch. 12Bit 0-20mA, 0-10V

Additional Information

Medium Description: AO610 Analog Output 16Ch. 12Bit 0-20mA, 0-10V

Product Type: I/O Module

Technical Data:

S600 I/O Analog Output Module

16 channels, 12 bits resolution

0-20 mA, 0-10 V, opto-isolated as one group

Note: This part is exempt from the scope of 2011/65/EU (RoHS) as provided in Article 2(4)(c), (e), (f), and (j)

(Ref.: 3BSE088609 – EU DECLARATION OF CONFORMITY – ABB Advant Master Process Control System)

All events are stored with a resolution of 1 ms in the central unit and in the BUs.

System, protection and test events can be generated.

Protection events refer to the protected busbar and include the changes in the disconnector and breaker positions,

trips, etc. Test events are recorded during testing with the test signal generator.

System events describe the diagnostic and fault messages of the NBP system as a whole.

Frequency protection, including overfrequency, underfrequency and frequency rate-of-change protection,

is offered in IEDs with standard configurations H and J. 

The IED also incorporates optional three-pole multi-shot auto-reclose functions for overhead line feeders.

Enhanced with optional hardware and software,the IED also features three light detection channels 

for arc fault protection of the circuit breaker, busbar and cable compartment of metalenclosed indoor switchgear.

The arc-fault protection sensor interface is available on the optional communication module.

Fast tripping increases staff safety and security and limits material damage in an arc fault situation.