The G122-824 P-I Servoamplifier is used in closed loop applications where
a proportional and/or integral amplifier is needed.
Selector switches inside the amplifier enable proportional, integral or both to be selected.
Many aspects of the amplifier’s characteristics can be selected with internal switches.
This enables one amplifier to be used in many different applications.
The configuration options provided are the result of many years of experience in designing and commissioning closed loop systems.
The Servoamplifier employs analog electronics.
It accepts three input signals, two single ended and one differential.
These are summed to produce an error signal which is then amplified proportionally and also integrated.
The proportional and integral signals are switched together and output as a current or voltage to drive a servovalve.
Front panel trim pots, LED indicators and test points allow fast and easy setup and aid in trouble shooting.
The servoamplifier is housed in a compact DIN rail mounting enclosure and requires a +24V supply.
along with diagnostic information, onto a single medium speed expansion channel on the 914-HDE. This bandwidth
is dynamically shared between the two Ethernet ports, allowing for total throughput of up to 1000 Mb/s.
Optionally, the 914-EX can be configured for dual expansion mode, which uses two medium speed expansion
channels on the 914-HDE. This mode allows for a full 1000 Mb/s of bandwidth per Ethernet port and is ideal for
high bandwidth video over IP or GigE vision applications. Since the 914-HDE motherboard multiplexes the Ethernet
data from the 914-EX card and other expansion cards in the system, the total system bandwidth usage must be
considered, and be at (or under) the maximum optical bandwidth available for the system. Refer to Section 3.2 for
detailed information 914-X series card bandwidth usage.
MOOG | D136-006-001 | EtherCAT slave interface |
MOOG | RDISP 22 Operator Panel | DISPLAYS |
MOOG | B95863-001 | CAN Connection Cables |
MOOG | B95863-002 | CAN Connection Cables |
MOOG | B95864-001 | CAN Termination Resistors |
MOOG | B95865-001 | CAN Termination Resistors |
MOOG | CA94286-001 | Accessories for Ruggedized Motion Controller |
MOOG | CB03223-001 | Accessories for Ruggedized Motion Controller |
MOOG | CA98502-001 | Accessories for Ruggedized Motion Controller |
MOOG | B95906-001 | MSCI Motion Controller |
MOOG | CA65865-001 | MSCl Motion Controller |
MOOG | CB08987-001 | Ruggedized Motion Controller |
MOOG | CA65866-001 | MSD Motion Controller |
MOOG | C43148-001 | QD10 16/16 Digital l/0 module |
User name | Member Level | Quantity | Specification | Purchase Date |
---|
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved