Honeywell CPO-IO830A ComfortPoint Open MIXED I/O MODULE

GENERAL

The ComfortPointTM Open Mixed I/O Module CPO-IO830A is

an independently mounted electronic module which is

designed for use in home (residential, commercial, and light

industrial) environments.

Specifically, it conforms with DIN 43880. with a max. slot

height of 45 mm, and is thus suitable for mounting in fuse

boxes. But it is also suitable for mounting on 35 mm standard

panel rails (both vertical and horizontal mounting possible).

The CPO-IO830A features a large complement of different

inputs and outputs which are automatically commissioned

(with firmware download) by the ComfortPointTM Open Plant

Controllers CPO-PC-6A, CPO-PC400. and CPO-PC200.

The CPO-IO830A communicated via the Panel Bus, and thus

employs the Panel Bus communication protocol. It can be

stationed up to 1.000 meters away from the controller (pro

vided it is then supplied with power by a separate, nearby

transformer).

The CPO-IO830A also features 20 inputs, 14 outputs, and 18

status LEDs. Up to 16 Mixed I/O Modules can communicate

with the controller.

The CPO-IO830A features both push-in terminals (for con

nection of other modules using the XS816 Bridge Connector)

and screw-type terminals.

Clearly visible LED control lamps convey important status and

alarm information.

The CPO-IO830A has a durable, anthracite-colored plastic

housing conforming with DIN 43880. It is thus suitable for

mounting in fuse boxes, but can also be mounted on 35 mm

standard panel rails (both vertical and horizontal mounting

possible).

FEATURES

• 24 Vac (+/- 20%) or 21…30 Vdc power supply (from

external transformer).

• Overvoltage protection: All inputs and outputs are

protected against overvoltages (24 Vac ± 20%; 30 Vdc)

as well as against short-circuiting.

• In the event of communication problems, the relay

outputs move to safety positions configured in

ComfortPointTM Open Studio.

• Push-in terminals for quick and convenient connec

tion to neighboring modules using the XS816 Bridge

Connector (regular cabling also possible).

• Status LED, service LED, power LED.

• Hex switch for setting Panel Bus address.

INTERFACES AND TERMINALS

The CPO-IO830A features an RS485 interface via which it

can communicate with other system components. This

interface employs the Panel Bus communication protocol.

Troubleshooting can be performed using the LEDs.