Honeywell ComfortPoint Open CP-EXPIO (EXPANSION IO BOARD)

Trademark Information

ComfortPointTM Open is a trademark of Honeywell

International Inc.

BACnet® is a registered trademark of ASHRAE Inc.

UL Logo, FCC statement, and the CE Mark Logo are used to

indicate product compliance and/or conformance to those

standards. These Logo/Marks are trademarks of the

respective agencies.

GENERAL

• Expand point capacity of the supported plant controllers to

a maximum of 256 physical I/Os for firmware 2.1 and later

versions. For firmware 2.1 and earlier versions a maximum

of 128 physical I/Os.

• A maximum of 15 CP-EXPIO modules can be added for

CP-IPC controller and 16 CP-EXPIO modules to CPO-PC 6A.

• Powerful processor to support faster IO scanning.

• Flexible and easy configuration with ComfortPoint Open

Studio.

FEATURES

Powerful Processor

CP-EXPIO Expansion I/O Boards have powerful onboard

processors for fast input/output scanning.

Mixed Inputs and Outputs

CP-EXPIO comes with a mix of 24 input and outputs to suit

any application requirements.

Expandable

The ComfortPoint Open plant controller can connect up to: -

15 expansion IO boards (for CP-IPC).-

16 expansion IO boards (for CPO-PC-6A).

All the Expansion IO boards are connected on the same

RS485 CP-IO bus.

Programming and Configuration

ComfortPoint Open Studio allows users to add/delete/modify

expansion boards and IO Assignment.

Addressing

Addressing of CP-EXPIO is done via onboard HEX Switch.

The address can be between 1 through 15. For firmware 2.1

and later the address can be selected between 0 through 15.

Firmware Upgrade

Firmware on the CP-EXPIO can be easily upgraded using

ComfortPoint Open Online.

Flexible mounting options

DIN-rail or Wall mounting.