Trademark Information
ComfortPoint™ Open is a trademark of Honeywell
International Inc.
BACnet® is a registered trademark of ASHRAE Inc.
Disclaimer
All images used in this document are for illustrative
purposes only and may not match the actual product.

APPLICATION
CPO-PC400 is a new and advanced plant controller of the
ComfortPoint™ Open (CPO) Plant Controller family. It is an
Ethernet-based, freely programmable, and native BACnet®
Building Controller (B-BC).
CPO-PC400 is designed for a wide variety of complex
applications. This device features numerous RS485
communication interfaces, two standard Ethernet
interfaces, an MMI interface, and two USB interfaces.
CPO-PC400 can be mounted on either a DIN rail or remote
mounted in a horizontal or vertical position.
FEATURES
• Conforms to BACnet Standard 135 protocol version
1.14 (ISO 16484-5).
• Three pairs of LEDs indicating the transmission and
reception (respectively) of data via the RS485
interfaces 1.2. and 3.
• Ring LED to show the operational status of the
controller.
• Two Ethernet connectors with status LEDs.
• An MMI interface to connect with the CPO-MMI
device.
• Four RS485 interfaces to support Panel bus, BACnet
MS/TP, Field Bus, Modbus, M-Bus, CP-IO protocols,
and C-Bus data sharing.
• Built-in advanced diagnostics software facilitating
troubleshooting.
• FRAM to store the live data for the controller
including storing last known values when power is
removed.
• DDR3L for Random Access Memory.
• EMMC for program storage and boot flash memory.
• UTF-8 and UCS-2 character encoding formats are
supported.
• Supports Peer-to-Peer communication.
• A reset button to restore the factory default settings.
• Removable terminal blocks with Push-in or Screw
terminals.
• Built-in Webserver with HTML5 graphics support.
• A micro USB and a USB Type A ports.
wechat/whatsapp:
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved