GE 8133-HI-TX 8-Channel Supervised AI with HART

PAC8000 Process Controllers

The PAC8000 Controllers include a Process Controller featuring distributed control system (DCS)- style function block programming; 

a Logic Controller featuring 61131-style programmable logic controller (PLC) programming; 

and a Hybrid Controller that provides both programming styles in the same unit. 

A SIL 2 SafetyNet Controller and an RTU Controller are also available, which provides DNP3 communication for the PAC8000 family. 

The 8521-EB-MT Bus Interface Module, for remote I/O applications, shares the same hardware as the controllers listed below. 

It can be upgraded from a bus interface module to a full controller by firmware download, which is especially useful in ongoing legacy system replacement. 

• 8 isolated, universal, input channels

• Configurable on a channel by channel basis: 4-20mA, THC, RTD, resistance &voltage

• 250V ac rms channel to channel isolation

• Thermocouple types B, E, J, K, N, R, S, T, W3. W5. Russian K, Russian L

• RTD Types Pt100. jPt100. Pt200. Pt500.Ni120. Cu10

• Volt input types ±120mV, 0-1V, 0-5V,1-5V, 0-10V, ±10V

• 2 or 3-wire RTDs

• 2 or 4-wire transmitters

• Non-incendive field circuits

• 24 V dc bussed field power required

CONFIGURABLE PARAMETERS

Sensor type

• User selectable

Alarms

• High-high, high, low and low-low

Alarm deadband (hysteresis)

• User defined value

Input dead zone

• User defined value

Channel status

• Active / inactive

Filter/sample rates

• User selectable

GENERAL SPECIFICATIONS

Common mode rejection (using 50/60Hz filter)

• > 120 dB @ 50/60 Hz

Series mode rejection (using 50/60Hz filter)

• > 65 dB @ 50/60 Hz

Maximum input voltage (except current I/P)

• ± 25V

Common mode voltage between channels

• 250 V ac rms

Isolation

• Channel to channel – 250 V ac rms

• Any channel to Railbus – 250 V ac rms

• Any channel to Bussed Field Power – 250 V ac rms

• Railbus to Bussed Field Power – 150 V ac rms

Input filter response

• Time constant 4 ms

Input impedance

• > 1 M ohm

Data Format

• 0 to 65535 corresponds to selected span

Features

• PAC8000 I/O is a completely modular I/O solution for both general purpose and hazardous area applications.

  It offers a wide variety of I/O functions, and has an open architecture that allows communication with

  a variety of different field-buses by selecting the appropriate type of Bus Interface Module (BIM) or Controller.

• Field terminals (one per I/O module) snap onto the carrier and accept field wiring without the need for additional terminals or connections.

  They can be changed easily if damaged in the field. A comprehensive mechanical keying system ensures that equipment safety is maintained.

• Carriers form PAC8000s physical and electrical backbone by providing a mounting onto a flat panel or T- or G-section DIN rail.

  They support and interconnect the BIM or Controller, power supplies, I/O modules and field terminals,

  and carry the address, data and power lines of the internal Railbus

• Returns commoned internally

• Pulse counting option

• 24 V dc bussed field power required