ABB Plastic fiber 1MRS050889

REF611 is a dedicated feeder protection relay designed for the protection, control, 

measurement and supervision of utility substations and industrial power systems.

The feeder protection relay REF611 can be supplied either with directional or non-directional overcurrent and earth-fault protection. 

Directional earth-fault protection is mainly used in isolated neutral or compensated networks, 

whereas the non-directional earth fault protection is intended for directly or low-impedance earthed neutral networks.

REF611 is a member of ABB’s Relion® product family and part of its 611 protection and control series of relays.

PCM600 and relay connectivity package version

• Protection and Control IED Manager PCM600 2.8 or later

• RET615 Connectivity Package Ver.5.1 or later

• Parameter Setting

• Signal Monitoring

• Event Viewer

• Disturbance Handling

• Application Configuration

• Signal Matrix

• Graphical Display Editor

• Communication Management

• IED User Management

• IED Compare

• Firmware Update

• Fault Record tool

• Load Record Profile

• Lifecycle Traceability

• Configuration Wizard

• AR Sequence Visualizer

• Label Printing

• IEC 61850 Configuration

• IED Configuration Migration

• Differential Characteristics Tool

This includes:

 Motor starter and feeder modules (all sizes), which are equipped with measuring and

communication electronic device MControl

 Motor starter and feeder modules (all sizes), which are equipped with intelligent device,

UMC and M10x, communicates to MLink.

 Circuit breakers connected to the switchgear communication with the interface MConnect

 Circuit breakers connected to the switchgear communication with the interface MLink

Excluded from supervision in MService are all modules not connected to the internal switchgear

communication such as MSpeed (Variable Speed drives in MNS iS) and conventional modules.

Fieldbus

MLink can include Fieldbus communication to DCS. The type of Fieldbus must be selected

before ordering the MLink type. The Fieldbus specific information (PROFIBUS, MODBUS etc.)

can be found in the following documents:

MNS iS Interface Manual Profibus

MNS iS Interface Manual Modbus

MNS iS Interface Manual Profinet IO

Supported Functions

MService Condition Monitoring covers the following main functions:

 Collection of operational data of the supervised modules

 Collection of all alarms and trips generated in the supervised modules

 Collection of maintenance warnings derived from additional assessment logic related to the supervised modules.

 Display of the MNS or MNS iS system structure highlighting modules signaling problems

 Display of historical data in trend displays

 Detailed information on the identification, location, and type of supervised modules

 Online supervision of temperature or power loss related problems within individual cubicles.

MService can supervise all modules in MNS and MNS iS, which are connected to the internal

switchgear communication bus. 

REB611 ABB Busbar protection REB611

REX521GHLPSH51G Feeder protection relay ABB

REX521GBHPSB01G Feeder protection relay ABB

REX521GHHPLH50G Feeder protection relay ABB

REX521GHHGSH07G Feeder protection relay ABB

REU610CCVVHCNN ABB Voltage relay REU610

REA103-AA ABB Arc fault protection module – Expansion module

REU610CVVHCHG01 ABB Voltage relay REU610

REX521GHHGSH50G ABB Feeder protection relay REX 521

RET615J ABB Transformer protection and control

REM615J ABB Motor protection and control REM615 IEC

REU523B409BAA ABB Over- and undervoltage relay REU 523

REU610CVVHCNN ABB Voltage relay REU610

REF541KM115AAAA ABB Feeder terminal REF 541

REF541DM115AAAA ABB Feeder terminal REF 541

REF620E_F NBFNAAAANDA1BNN1XF IEC feeder protection and measurement and control device ABB

REF615E_G HBFEAEAGNDA1ABA1XG Feeder protection and control ABB