DEIF AMC 600 Wide range of protocols supported

Wide range of protocols supported

By default, the AMC 600 uses the EtherCAT protocol, providing support for several hundreds

of I/O points and letting you place multiple I/O nodes in different physical locations to reduce cabling.

You get the same update speed for local and distributed I/Os, and the modules are

designed to support EtherCAT cycles as fast as 1 ms.

Additionally, the AMC 600 supports several different protocols for example

PROFINET, MODBUS TCP/RTU, OPC UA and even HTTPS/WSS for Cloud connectivity,

giving you the freedom to easily design a new solution or integrate the AMC 600 in an existing one.

Compact size reduces space requirements

The AMC 600 is a compact controller that reduces space requirements in your control cabinets.

With a rack height of just 122 mm, it fits the de facto PLC standard, and the depth

is only 114 mm (130 mm with connectors). The I/O modules of the AMC 600 are

also high-density, reducing the required cabinet backplane footprint to 1.2 cm2 per digital I/O channel.

Fast, fail-safe, and secure system software

The AMC 600 uses a Linux OS maintained in-house by DEIF, a fast-starting, fail-safe,

robust, and secure system software. The architecture of the platform is fully open,

giving you full access to system set-up, plus a world of options including web-based configuration,

user management, IEC 61131-3 programming via CODESYS V3.5. and secure web-based visualisation.

A wide range of communication protocols like MODBUS RTU/TCP, OPC UA, CAN/CANopen, J1939.

and PROFINET are provided as standard. Controller redundancy is supported by the CODESYS

Controller Redundancy feature via Single Licenses.

The AMC 600 has two OS images that are separate from the application.

If a start-up or software update fails, the unit switches to the other image and completes the operation.

Both images can be updated, and troubleshooting can be carried out, using remote access.

The AMC 600 handles software updates itself.