DEIF AGC 150 Remote Display Remote access and control unit

With the AGC 150 Remote Display unit, you can access and control any

master controller in the AGC 150 series over the local network.

This provides fast incident response and operational convenience.

The AGC 150 Remote Display acts as a mirror of the master controller

in your application, providing remote access and control for any master controller

in the AGC 150 series over the local network. 

It enables fast operator response to operational incidents and convenient access 

to all controller parameters from a secondary location.

The unit is ideal for central control rooms and for providing easy access to controllers

in hard-to-reach locations, for example controllers mounted in canopies or

containers that are stacked on top of each other and out of reach.

Same features as the master controller

The AGC 150 Remote Display gives you access to all of the features in the master

controller it is linked to, making remote configuration of controller parameters

as easy as using the master controller itself. The user-friendly display and menu

structure in 8 languages is the same as the rest of the AGC 150 series.

Configuration changes performed on the AGC 150 Remote Display are immediately

eflected on the master controller, and vice versa.

Flexible connection options

Installation and connection of the AGC 150 Remote Display is quick and easy.

The unit can be connected to its master controller over the local network through

an Ethernet switch or using a point-to-point cable connection, and the front-mounted

IP 65 classified enclosure is as easy to install as all other controllers in the series.