DEIF iE 150 Marine Simple and effective power management

Simple and effective power management

You can set up simple and effective power/energy management systems with up to 7 energy sources.

This gives you stable operation and reliable power round the clock, and it optimises fuel consumption

and balances the loads in the system. The iE 150 Marine supports multi-master control:

If the current master controller fails, another takes over master controller duties,

and all other controllers continue to operate.

Need E27 cybersecurity and more energy sources?

Check out the iE 250 Marine!

Dynamic positioning or other advanced features required?

Check out the iE 350 Marine!

Ideal for battery retrofit

The ability to control and protect an ESS makes the iE 150 Marine ideal for replacing one or

more onboard generators with a battery pack. This helps you run the remaining gensets more

efficiently and reduce fuel consumption and emissions. The iE 150 Marine is widely compatible with

other devices and can be used in solutions with full DEIF control or mixed controller brands.

Easy to use, easy to reconfigure

Using and reconfiguring the iE 150 Marine is very easy. The illuminated buttons on the front-mounted

device guide you, and you only see options that are relevant for the present function.

The controller is password-protected, and you can configure the necessary permission levels.

And because it comes with all necessary control software, you can quickly reconfigure it for

different applications by accessing its parameters from the display or the PC tool.

For vessels with up to seven energy sources, the iE 150 Marine gives you reliable and cost-effective

asset control and power management with all the features you need to ensure uninterrupted and efficient power delivery.

COMPATIBLE

You can use the iE 150 Marine to design a new asset control or power/energy management

system from the ground up for newbuilds, and you can integrate it in existing control solutions

(interfacing with other DEIF or third-party controllers). It can be configured as a genset or

battery master controller and read data from other controllers on the network.

The device can communicate with a wide range of engines and ECUs (engine control units)

and also supports the J1939 protocol for engine drive applications.

The ability to use the controller for newbuild or retrofit projects makes the iE 150 Marine

widely compatible with other devices. Full DEIF control or mixed controller brands?

Complete refit or upgrade of existing assets? Standalone asset control, energy management,

or engine drive? The choice is yours, and it’s all possible with the iE 150 Marine.