DEIF TAS-331DG AC transducer for active or reactive power

Powerful, fast and compact, the TAS units in DEIF’s transducer range measure power

or reactive power on a 1- or 3-phase AC network and provide output signal as

direct current or voltage signal proportional to measurements for PLCs, PCs,

microprocessor control, indicators, alarm units etc.

TAS transducer ranges are micro-controller-based with one analogue output for

measurement of power, voltage, current etc. on an AC network.

Because these transducer rangers have no mechanical parts like potentiometers,

the calibration stability is excellent.

TAS transducers range can be delivered pre-configured to set measuring

values and ranges or un-configured for customer configuration using DEIF’s free PC tool.

Features

• Transducer range, TAS 331DG - Features

• The transducer range by DEIF has a long list of features

• Factory-configured transducer for power or reactive power measurement.

• Aux supply: from 57 to 690 V AC

• Aux supply: 24 to 220 V DC

• Class 0.5 measurement

• Supply and measuring voltage up to 690 V

• Pre-configuration or easy PC tool configuration

• Configurable up to three output slopes

Variants

TAS-311DG

• Factory-configured transducer for voltage, current, frequency or phase angle measurement.

• Aux supply: from 57 to 690 V AC.

• Aux supply: 24 to 220 V DC.

TAS-321DG

• Factory-configured transducer for bidirectional current measurement.

• Aux supply: from 57 to 690 V AC.

• Aux supply: 24 to 220 V DC.

TAS-331DG

• Factory-configured transducer for power or reactive power measurement.

• Aux supply: from 57 to 690 V AC.

• Aux supply: 24 to 220 V DC.