ABB P3BSE000566R1 AX670 Analog Hybrid Module

Support and migration of ABB S600 I/O for Advant Master DCS,

local rack based I/O for Advant Controller 110 and Advant Controller 160.

The S600 I/O series serves as the local, rack-based I/O for the Advant Controller 110 and the Advant Controller 160.

There is a full complement of S600 I/O modules to choose from for digital and analog inputs and outputs.

The I/O range covers both D.C. and A.C., from low-cost, high-density modules to high-performance modules with kilovolt isolation.

There is even an intelligent pulse counter module for accurate length measurement and

positioning that can cope with pulse frequencies as high as 100 kHz.

Available is also a rotational speed input module with on-board trip logic, which is suitable,

for e.g. turbine control and high speed drive applications.

S100 I/O is the central process interface for Advant Controller 400 series process controllers.

Thanks to built-in cablemarshalling facilities and parallel communication with the host controller,

it is the right choice for centralized I/O systems and high-speed applications.

The range of process I/O modules is complete,consisting of general purpose digital and analog

inputs and outputs and special interfaces for specialtasks. These specials include pulse counting,

frequency measuring, positioning, motor speed control and communication with other controllers.

All I/O modules provide simple interfacing, accurate -yet fast - control, and easy integration of individual

loops into a comprehensive plant-wide control and supervision system.

S600 I/O Digital Input Module. 32 channels, 24/48 V d.c., 

internal 48 V sensor power supply, opto-isolated, sequence of event capability, wire break supervision

Note! This part is exempted from the scope of 2011/65/EU (RoHS) as provided in Article 2(4)(c), (e), (f) and (j) therein

– EU DECLARATION OF CONFORMITY

Well-proven technology

For more than 40 years, MEGADRIVE-LCI drives

and soft starters have proven their maximum

reliability and availability in a wide range of

industries and applications where both high

power and high voltage are required.

DESCRIPTION

Support and migration of ABB S600 I/O for Advant Master DCS, local rack based I/O for Advant Controller 110 and Advant Controller 160.

The S600 I/O series serves as the local, rack-based I/O for the Advant Controller 110 and the Advant Controller 160. 

There is a full complement of S600 I/O modules to choose from for digital and analog inputs and outputs. 

The I/O range covers both D.C. and A.C., from low-cost, high-density modules to high-performance modules with kilovolt isolation. 

There is even an intelligent pulse counter module for accurate length measurement and positioning 

that can cope with pulse frequencies as high as 100 kHz. 

Available is also a rotational speed input module with on-board trip logic, 

which is suitable, for e.g. turbine control and high speed drive applications. 

Benefits that add value

Get a drive solution that meets the requirements of your application and

ensures high productivity and the optimum performance of your operations.

Benefit from the built-in expertise of our medium voltage drives and take

your business forward with everything working like clockwork.

The S100 I/O process interface modules for Advant Controller 400 series process controllers come with connection units,

simplifying cable termination and keeping noise and destructive spikes away from the central electronics.