ABB P3BHT300015R1 DI635 digital input 16CH

DESCRIPTION

Support and migration of ABB S600 I/O for Advant Master DCS, local rack based I/O for Advant Controller 110 and Advant Controller 160.

The S600 I/O series serves as the local, rack-based I/O for the Advant Controller 110 and the Advant Controller 160. 

There is a full complement of S600 I/O modules to choose from for digital and analog inputs and outputs. 

The I/O range covers both D.C. and A.C., from low-cost, high-density modules to high-performance modules with kilovolt isolation. 

There is even an intelligent pulse counter module for accurate length measurement and positioning 

that can cope with pulse frequencies as high as 100 kHz. 

Available is also a rotational speed input module with on-board trip logic, 

which is suitable, for e.g. turbine control and high speed drive applications. 

All S600 I/0-modules are enclosed in sheet metal covers to meet IP20 requirements and 

protecting against electromagnetic interference inside the rack and against rough handling outside it.

The field wiring is terminated on multi-pole connectors on the front of the modules a

spacesaving structure, providing a tidy installation.

ABB maximizes your system investment and provides an evolution path forward for your ABB DCS.

This is achieved by designing control systems for continuous evolution and by providing

service offerings that extend the life cycle and improve the availability and performance of systems in the ABB portfolio and beyond.

Benefits that add value

Get a drive solution that meets the requirements of your application and

ensures high productivity and the optimum performance of your operations.

Benefit from the built-in expertise of our medium voltage drives and take

your business forward with everything working like clockwork.

Well-proven technology

For more than 40 years, MEGADRIVE-LCI drives

and soft starters have proven their maximum

reliability and availability in a wide range of

industries and applications where both high

power and high voltage are required.

Energy efficiency

Our medium voltage drives run your motors

based on the demands of your process rather than

running them at full speed and ensure optimized

power consumption and process efficiency.

In this way you can save energy and reduce CO₂ emissions.

Document conventions

A particular convention may not be used in this manual.

• Abbreviations and acronyms are spelled out in the glossary. The glossary also

contains definitions of important terms.

• Parameter names are shown in italics.

The function can be enabled and disabled with the Operation setting.

• Parameter values are indicated with quotation marks.

The corresponding parameter values are "On" and "Off".

• Input/output messages and monitored data names are shown in Courier font.

ABB DSAO 110 Analogue output modules  

ABB DSAO 120 Analogue output modules  

ABB DSAO 120A Analogue output modules

ABB DSAO 130 Analogue output modules  

ABB DSAO 130A Analogue output modules  

ABB DSAX 110 Analogue output modules  

ABB DSAX 110A Analogue output modules  

ABB DSDC 111 power module  

ABB DSDI 110A Digital Input Modules  

ABB DSDO 115 Digital Output Module  

ABB DSDO 120 Digital Output Module  

ABB DSSR 122 power module power module 

ABB DSSR 170 power module  

ABB DSSS 171 power module  

ABB DSBC 174 Bus Expansion Module  

ABB DSBC 176 Bus Expansion Module  

ABB DSTD 108P Relay Modules 

ABB DSTD 108LP Relay Modules 

ABB DSTD 109P Relay Modules 

ABB DSTD 108P Relay Modules 

ABB DSTD 145 Relay Modules 

ABB DSTD 147 Relay Modules 

ABB DSTD 148 Relay Modules 

ABB DSTD 195 Relay Modules 

ABB DSTD 196P Relay Modules 

ABB DSTD 197 Relay Modules 

ABB DSTD 198 Relay Modules 

ABB SA1xx modem