Foxboro P0904FH Custom Processed Module

The FBM233 Redundant Field Device System Integrator (FDSI) module

provides an Ethernet interface between single- or dual-port field I/O devices

and the EcoStruxure™ Foxboro™ DCS.

Each FBM233 module has an RJ-45 connector (10/100Mbps copper

Ethernet connection) on the front of the module for connecting dual-port

Ethernet devices.

The FBM233 connects to an Ethernet switch or hub to communicate with one

external device or up to 64 external devices.

The combination of a pair of modules provides redundancy at the fieldbus

module (FBM) level. In this configuration, one FBM233 is the master and the

other is the tracking module. Input points on the control station are updated

from device input points received on the network connected to the master.

Device output points (depending on the I/O driver) are written by both the

master and the trace module.

If the I/O driver detects a problem (e.g. any device loses its heartbeat), a role

switch is automatically performed, or the user can switch roles at any time via

the SMDH.

The EcoStruxure™ Foxboro™ DCS Field Control Processor 280 (FCP280) is a distributed,

optionally fault-tolerant, field-installable controller module.

The FCP280 performs regulation, logic, timing, and sequence control with

connected Foxboro DCS Fieldbus Modules (FBMs).

It also performs data acquisition, alarm detection, and notification.

The FCP280. through a chassis-mounted network adapter, is connects to the Foxboro DCS

control network with standard fibre optic or 100 Mbps copper cable (see figure below).

The FCP280 requires Foxboro DCS Control Core Services Software v9.0 or higher.

A system with the FCP280 and this software is called an EcoStruxure Foxboro DCS Process Automation System.

Johnson Controls TL-CCT-0 License enabling Controller

Johnson Controls MS-FCP-0 License enabling Metasys Equipment Controller

Johnson Controls MS-DIS1710-0 Local Controller Display

Johnson Controls WRZ-SST-120 Refer to the WRZ-SST-120 Wireless Sensing System

Johnson Controls WRG1830/ZFR183x Pro Series Wireless Field Bus System 

Honeywell 900RTI-0100 REDUNDANT SIL UIO REMOTE TERMINALPANEL  

Honeywell 900RTR-HO01 RELAY OUTPUT RTP 

Honeywell 900RTS-O0O1 RTP-DO, Dl, Al, UIO- 16 Channel Remote Terminal Panel

Honeywell 900S50-0360-00 I/O Scanner- 1 Port(1 per I/O rack) 

Honeywell 900S50-0460 I/O SCANNER(FOR REMOTE RACK) 

Honeywell 900S50S-0360-00 l/O Scanner-1 Port(1 per I/Orack)

Johnson Controls NS-ATV7003-0 Handheld VAV Balancing Tool

Johnson Controls NS Series Network Sensors 

Johnson Controls AS-CBLTSTAT-0 Cable adapter for connection to 8-pin TE-6700 Series sensors

Johnson Controls NS-WALLPLATE-0 Network Sensor Wall Plate

Johnson Controls WRZ Series Wireless Room Sensors 

Johnson Controls WRZ-7860-0 Refer to the WRZ-7860 Receiver